Where is the Honda Fit sensor?

The position of Honda Fit sensor is as follows: 1. Oxygen sensor: installed on the exhaust pipe, it monitors the burnt gas and judges whether the engine is fully burned and whether the mixing degree is too thin or too rich. 2. Wheel speed sensor: generally located on the front wheel brake disc, it collects the speed of the car to judge whether it slips. If the sensor is damaged, ABS will fail. 3. Water temperature sensor: installed beside the thermostat, it converts the temperature of cooling water into electrical signals, increases the fuel injection amount and ignition advance angle at low temperature, prevents explosion at high temperature and delays the ignition advance angle. 4. Intake pressure sensor: generally installed on the throttle, it senses the resistance and pressure change of engine speed and load, and converts it into voltage signal for ECU to correct fuel injection quantity and ignition timing angle. If it fails, it will cause problems such as difficult ignition, unstable idle speed and weak acceleration.