How far is the radiator from home?

At least about one meter. Too close to the heat source will soon make the moisture in the furniture wood evaporate too much, which will lead to the contraction of the joints and tenons of the furniture and the cracking of the mortise-tenon deformation panel. It is best to rub beeswax on the back and inside of furniture.

Because the indoor air is dry in winter, it is easy to have dust. At this time, we should pay attention to the cleaning and maintenance of furniture surfaces. Gently wipe off the floating dust on the surface with a dry and soft cotton cloth at regular intervals, and wipe off the dust accumulated on the edges and corners of furniture with a towel at regular intervals.

Furniture should also avoid direct sunlight. "We should try to avoid outdoor sunlight irradiating the whole or part of the furniture for a long time, put it in a place that can avoid sunlight, or use transparent gauze curtains to separate the direct sunlight, which will not affect indoor lighting, but also protect indoor furniture.

What is the distance between the radiator and the furniture?

Due to the limitation of apartment type, the current thinking is that the heating is under the desk, the radiator is about 10cm away from the desk panel, side panel and back panel, and the wardrobe is placed against the heating pipe, and the back panel is about 3cm away from the heating pipe. Will heating in winter lead to cracking and deformation of furniture? Will it accelerate the release of formaldehyde? Note: the furniture is prepared with grating plates. Please help the staff.

Is the distance between leather sofa and radiator 10 cm enough?

It can be a little bigger.

Skin is not heat-resistant.

Dermal refers to natural leather, which is processed from animal skin. Fake leather refers to synthetic leather or other products that look like genuine leather, but are actually artificially synthesized with chemical raw materials. Since the appearance of synthetic leather, it has been imitating natural leather. After years of efforts, it has been very close to natural leather in various characteristics, especially in appearance, which is almost indistinguishable.

However, the structure of natural leather is very complex, and it is still very difficult or even impossible to imitate it seamlessly under the current conditions. Although fake leather is sometimes confused with fake leather, if you master the identification method, you can still distinguish real leather from fake leather:

1, look: first of all, we should distinguish it from the patterns and pores of leather. We can see that there are indeed patterns and pores on the surface of natural leather, and they are unevenly distributed. There are animal fibers on the reverse side, and the side section is clearly identifiable. There are animal fibers in the lower layer. When scraping with fingernails, the leather fibers will stand up and feel fluffy, and a small amount of fibers will fall off, while the fabric can be seen on the reverse side of synthetic leather, and there is no animal fiber on the side. But some have artificial pores, which are not obvious, some patterns are not obvious, or there are regular artificial patterns, and the pores are quite consistent. Natural leather is irregular in shape and uneven in thickness. Its surface is often more or less, light or heavy with some natural defects, smooth and meticulous, generally loose on both sides and abdomen. The whole skin has obvious pores and patterns, and there are generally piles in the skin. Synthetic leather has uniform thickness, smooth surface, no natural defects, uniform pores and patterns, and generally no pile in leather.