Mechanic's personal year-end summary
Flowers are similar year after year, and people are different year after year. It is the end of the year again. Looking back on the work of the past year, there must be a lot to sort out. Now you must be either making a year-end summary or preparing. How to output a touching year-end summary? The following is my personal year-end summary of machinists (5 selected articles), which is welcome for your reference and I hope it will help you.
The mechanic's personal year-end summary is 1. I love my job, strictly demand myself, abide by the regulations of the factory, strictly control myself, straighten my work position, and always maintain a "modest, cautious, self-disciplined and positive" work attitude. With the care and guidance of my leaders and the help of my colleagues, I always study hard, make positive progress, strive to improve myself, always work hard, complete my tasks seriously and perform my duties well. Adhere to the ideal of building a good factory and firmly believe in improving workers' income. Constantly strengthen study and work skills!
First of all, do your job well.
To be a mechanic, you should have a clear understanding of your work and be familiar with and skilled in your work. It is necessary to have an understanding of all mechanical equipment, but also to have the ability to deal with failures and deal with possible equipment failures at any time. In order to meet the needs of production progress, although the equipment in our unit is new, it often breaks down, such as the whole cleaning machine, but there are no major failures and minor failures. In the process of maintenance, the understanding of the whole cleaning machine is gradually improved, and minor faults can be dealt with quickly. There is also a liquid sandblasting machine, which always breaks down during use, blocking the sandblasting nozzle, making it unable to work and completely injured. After the operator describes the cause of the fault. The diameter of the glass ball used is larger than before, and the specifications are not uniform, which leads to nozzle blockage. After bold improvement, the aperture of the nozzle is increased, which makes the liquid sandblasting machine work normally. For the tunnel sweeper, the transmission chain is always stationary. After adjusting the friction force before, it was ok, but once, no matter how to adjust the friction force. After analysis, it is considered that the friction coefficient is not enough. It was opened and found to be true. After careful cleaning, the oil stain has been removed and everything is normal. For a series of maintenance work, we must understand the principle of the equipment in order to maintain it well. This is what I have been doing for many years. During maintenance, I will try my best to study what I don't understand. Once you understand it, you will suddenly realize that it looks complicated. As long as I understand, it's easy. I not only undertake the work of equipment maintenance, but also complete a lot of tooling production. The design and manufacture of several types of engine test beds and mobile engine placing tables have increased a lot this year. There was no such test bench before, and we immediately accepted and actively completed the task in the workshop, from conception to leader's adoption of design intention, to cutting, welding, production and so on, until the engine was put into storage, debugged and delivered. The experiment of each engine model has to go through our first process, just as a good military force does not move grain and grass first. I feel honored when all kinds of engines are tested on the bench I made. I thank the leader for giving me such a platform. I am excited that my labor achievements have played a role and proud of our development in the manufacturing industry, but these will make me work harder and learn from others with an open mind. Improve your working ability as much as possible, let yourself play a role in the post, complete the work faster and more efficiently, and also benefit our unit, so that your work and workers' gains can also reach a balance, and make yourself more motivated and confident.
Interpersonal relationship with other colleagues is also very important, because a person's ability is limited, and everything depends on collective wisdom, so unity with colleagues is the premise of successfully completing the tasks assigned by the leaders, which is not only work, but also in daily life, so unity with other colleagues is not only a personal matter, but also an obligation of work! I have a good relationship with my colleagues and often help each other, because at first I was the only mechanic and there was also an electrical mechanic. I have a good relationship. I respect all my colleagues who work with me. At work, I cooperate with each other, and the efficiency has improved a lot. For example, in security window, where the oil depot is welded, at the entrance of the experimental station, when the waterproof asbestos tile roof of the sandblasting room is made, and when the pneumatic pipeline is welded to the sandblasting room, we work collectively. I have a deep understanding, and I am also careful in repairing the old and making use of the waste. Waste angle steel is used to make the rain-proof roof, and the threading pipe of the waste factory building is used to weld the air-compressed pipeline.
Second, look back and look forward to the future.
Regarding the gains and losses in the past, I will learn from the favorable factors, strengthen my working ability, and exclude the unfavorable factors from my future work. A year's work has made me make some achievements on the road of continuous progress for remanufacturing. I believe that through my efforts, the cooperation of my colleagues and the guidance of my leaders, I will become an excellent employee, give full play to my ability, and thank my leaders for giving me a suitable job position, so that I can make due contributions to society.
In the past year, I did my best. I believe that in my future work, I will continue to work hard for the development of remanufacturing and the improvement of employees' income. Although my work this year is still unsatisfactory, I believe that as long as I stay in my post for one day, I will make my own efforts and put all my energy and ability into my work. I believe I can do it well!
Mechanic's personal year-end summary 2 I. Completion of main tasks
Compared with the work plan and task objectives formulated at the beginning of 20XX, the workshop completed the following tasks:
1, successfully completed the spare parts preparation and maintenance of the company's parking plan maintenance from late April to early May.
2. Complete the plugging of 3# Roots blower and aftercooler, and replace 2# Roots blower aftercooler. Replace the new reducer of 2# cooling tower.
3. Blind plates and manholes at the inlet and outlet of deoiling tank, normal temperature zinc oxide tank and fine desulfurization tank in the conversion process have been dismantled and installed.
4. Assist the outsourced high-pressure welder to successfully complete the replacement and repair of the furnace tube of the comprehensive heating furnace.
5. Strengthen the inspection, maintenance and maintenance of equipment, and actively promote predictive maintenance and planned maintenance. Completed the daily equipment maintenance and emergency repair work, ensuring the normal and stable operation of production.
6. Do the weekly safety study and training for employees as planned, further improve the safety awareness of employees, and complete the rectification of potential safety hazards.
7. Strengthen team building. Establish clear * * * goals; Strive to create a positive, enterprising, United and upward working atmosphere.
8. Strengthen the professional skills training of employees. Carry out technical training, on-site training, physical explanation and delivery, and help belt. We have strengthened the training and study of fault handling and maintenance techniques for coke oven gas compressors, oxygen compressors, nitrogen compressors and pumps. Through training, the professional skills of employees are improved to the maximum extent, and the safe and stable operation of production is better guaranteed.
Second, work innovation.
The innovations of 20XX workshop are as follows:
1. Completed the installation of gas-liquid separator for conversion.
2. The selection and transformation of the four-stage gas valve of the coke oven gas compressor were completed, the use of PEEK was locked, the frequency of stopping and reversing of the coke oven gas compressor due to gas valve failure was controlled to the maximum extent, and the maintenance workload and cost were reduced.
3. Improve the personal equipment charter work, focus on personal charter, strengthen the responsibility consciousness of charter personnel, especially strengthen the basic quality training of key and key equipment charter personnel, implement regular inspection system for key parts of large-scale key equipment, pay close attention to its operation status, and ensure its safe operation. Strengthen the combination of daily inspection and maintenance of equipment with regular maintenance, refine the management of equipment maintenance, improve the level of equipment management, and control and reduce sudden equipment failures.
4. In terms of repairing the old and recycling the waste, the maintenance personnel actively tried to repair more than 30 ordinary gas valves (one in 1.200 yuan), more than 20 PEEK gas valves (one in 2400 yuan) and 24 oilers (one in 1.700 months) of the coke oven gas compressor. Save the company more than 80,000 yuan for spare parts.
Third, experience summary
The experience gained by the maintenance department in 20XX years of work is as follows:
1, hurry up and take the initiative to ensure the work progress. In all work, we should firmly establish the consciousness that speed is quality, speed is benefit and speed is responsibility, and plan, arrange and act early. And make a careful and feasible maintenance plan.
2, strict maintenance standards, to ensure the quality of work. The maintenance effect is an important index to evaluate the technical level and sense of responsibility of maintenance workers. It is necessary to take the quality of work as the top priority, strengthen the management and control of the whole maintenance process, and ensure that the quality of work meets the requirements of specifications and the best state of equipment performance.
3, adhere to the standard operation, to ensure safety in production. In every link of daily work, we should always adhere to the working principle of "safety first", establish the concept that safety is benefit, and eliminate hidden dangers in production safety.
4. Arrange the time reasonably, and communicate frequently on the problems, deficiencies and mature experiences in maintenance, so as to provide a platform for everyone to learn from each other.
Four. Defects, Cause Analysis and Improvement Measures
1. Although the staff's professional skills training has been persistently carried out, the staff's skill level has been significantly improved, but it still can't meet the production demand on the whole. In the future work, it is necessary to increase the frequency, intensity and comprehensiveness of training to meet the production demand as soon as possible.
From February to May, through the parking, maintenance and daily work of equipment, it was found that it was necessary to grasp the ideological trends of employees in time and accurately, manage ideas flexibly without violating principles, avoid and put an end to employees' emotional work, and ensure the progress and quality of work.
3. Due to the loss and replacement of maintenance personnel, the current situation is tense and cannot meet the current production needs. Now it has restricted the predictive maintenance of large equipment.
4. Because the maintenance skills and level of employees are still relatively low, especially for coke oven gas compressors, oxygen compressors, steam turbines and other large equipment, I hope the company can provide more learning and training opportunities.
Mechanic's Personal Year-end Summary 3 In the past work, with the help of leaders, through the concerted efforts of Qi Xin, a worker colleague, and through my own active efforts, I successfully completed the work of equipment mechanic. I will make a serious summary of my work in these years. The following is my summary of my work:
1. Work attitude and ideological work.
I love my job, strictly demand myself, abide by all the rules and regulations of the factory, strictly demand myself, put my work in the right position, and always maintain a "modest, cautious, self-disciplined and positive" working attitude. With the care and guidance of the leaders and the help of my colleagues, I always study hard, make positive progress, strive to improve myself, always work hard, complete my tasks seriously, perform my duties well, constantly strengthen my study and strengthen my responsibilities.
2. Do your job well.
To be a mechanic, you should have a clear understanding of your work and be familiar with and skilled in your work. It is necessary to have an understanding of all mechanical equipment, but also to have the ability to deal with failures and deal with possible equipment failures at any time. In order to meet the needs of production schedule, equipment failures often occur in our unit. With my years of experience, I will try my best to study anything I don't understand during the maintenance process. Once you understand it, you will suddenly realize that it looks complicated. As long as I understand, it's easy. I not only undertake the work of equipment maintenance, but also complete a lot of tooling production. I feel honored and thank the leaders for giving me such a platform. I am also excited that my labor achievements have played a role, and I am proud of the development of our manufacturing industry, but these will make me work harder, learn from others with an open mind, improve my working ability as much as possible, make myself play the greatest role in my post, and complete my employees faster and more efficiently.
Work can also make our unit get the greatest benefit, so that my work and workers' gains can also reach a balance, so that I have more motivation and confidence in my work.
Interpersonal relationship with other colleagues is also very important, because a person's ability is limited, and all success depends on collective wisdom, so unity with colleagues is the premise of successfully completing the tasks assigned by the leaders, which is not only work, but also in daily life, so unity with other colleagues is not only a personal matter but also an obligation of work! In our work, mutual cooperation greatly improves our efficiency. We work collectively, cooperate with each other, take the initiative to attack and finish the task quickly. This is the power of unity. Only by exerting everyone's strength can the work progress faster. I have a deep understanding.
3. Review the past and look forward to the future
Regarding the gains and losses in the past, I will learn from the favorable factors, strengthen my working ability, and exclude the unfavorable factors from my future work. Years of work have made me make some achievements on the road of continuous progress for remanufacturing. I believe that through my efforts, the cooperation of my colleagues and the guidance of my leaders, I will become an excellent employee, give full play to my abilities, and thank my leaders for giving me this suitable post, so that I can make due contributions to society.
Over the years, I have done my best, and I believe I will continue to work hard for the development of remanufacturing and the increase of employees' income in the future. Although my work is not satisfactory, I believe that as long as I stay in my post for one day, I will try my best to put all my energy and ability into my work, and I believe I can do it well! Ensure the normal production and operation of the company.
Personal year-end summary of technicians 4 I. Work summary
Looking back on the past year, under the correct leadership of the company and the workshop, the machine maintenance department of the small workshop earnestly implemented the production and business objectives issued by the company and the workshop. Through the unremitting efforts of all employees, 65,438+06,550 pieces of various processed parts were successfully completed (by the end of 65,438+065,438+0) and 6,065,438 welded anode guide rods were repaired. Always do a good job in the service of logistics soldiers to ensure the normal operation of each workshop. The main work this year is summarized as follows:
(A) strengthen management to ensure safe and civilized production
"Safety first" is the basis of enterprise production and the premise for us to do all the work well. There are 57 employees in our workshop, who are mainly responsible for the production and processing of various workpieces and the maintenance of mechanical equipment. The workplace is wide, and various types of work cross-operate, so safety production is particularly important to our workshop. Therefore, the workshop must pay attention to safety at every meeting, widely publicize the importance of safe production, remind and urge the team to pay attention to safety at all times, make the safety alarm ring, and formulate the responsibility system for workshop safety. In June 5438+this year 10, the machine maintenance section signed the production responsibility certificate with each team. The purpose is to enhance employees' sense of security, strengthen their sense of responsibility, and put an end to carelessness and luck. In April this year, under the leadership of the small workshop, we organized a joint drill of machine repair and furnace repair, and the employees in our workshop actively signed up for it. Through this drill, the awareness of fire safety responsibility of workshop staff was further strengthened, and the joint cooperation and emergency response ability of workshops in the face of fire and other emergencies was enhanced. The seminar also organized staff training and case analysis, discussion and summary of major domestic safety accidents for many times. Encourage everyone to learn, actively combine the actual situation of their respective jobs, carefully find hidden dangers and hazards around them, nip hidden dangers in the bud, and put an end to safety accidents. At the same time, we also actively participated in the company's "ankang cup" activities and "Safe Labor Competition" activities. And implement all activities to the team, and put safety work in the first place.
(2) Overcome difficulties, attach importance to progress, and promote the overall completion of production tasks.
After long-term use of anode guide rods, some steel claws of the guide rods become thin, uneven and explosive blocks break. The increase in repair quantity affected the production turnover, and the high-purity aluminum workshop was rectified and put into production. In addition to meeting the daily maintenance, the guide rod class in the machine repair section stepped up the production of 585 new guide rods for the high-purity aluminum workshop to ensure the production needs of the brother units.
Since March this year, the company has carried out major minor repairs and major repairs. In response to the company's call for "cost reduction, energy saving and consumption reduction", the auxiliary workshop took the initiative to undertake some external processing tasks, such as repairing the cylinder hammer, making the cylinder adjusting bracket and repairing the cylinder cross arm, etc., which greatly saved the processing cost and reduced the production cost for the company.
(three) to improve the quality of workers as the goal, do a good job of workers.
Cultivating a team of workers with both ability and political integrity has always been one of the priorities of the mechanical maintenance department. To this end, the workshop always puts employee training in the first place and makes unremitting efforts. As early as the beginning of the year, the workshop formulated the annual staff training plan, striving to make the work orderly.
In March this year, in order to improve the technical level of each type of work and enhance the practical operation ability of employees, the machine workshop specially trained welders and locksmiths in the machine workshop to "learn theory and pay attention to practice". This training is organized according to the characteristics of more welders returning to work and more young workers. In order to ensure the training quality and prevent the training from going through the motions, and according to the actual situation of busy production in the workshop, the training is divided into morning and afternoon classes every day, that is, everyone takes turns to train, so that everyone can study and produce correctly. After three weeks of theoretical and practical training, everyone's business ability and professional level have been greatly improved.
Workshop workers actively learn job skills and participate in mass "five small activities". This year, the workshop workers have put forward a number of rationalization proposals to the company, such as "320xx off-type hydraulic jack guide rod straightener reform", "g425070 sawing machine clamping device repair", "multifunctional elastic damping cutter bar", "high-purity aluminum adjusting bracket reform" and "U-shaped plate high-efficiency plate bending machine", which have reduced the labor intensity for the company.
(four) to strengthen the ideological work of workers, and fully mobilize the enthusiasm of workers.
In daily production activities, we always put ideological and political work on production and construction, which greatly mobilized the enthusiasm of employees. In the first half of this year, the workshop worked out a secondary distribution scheme of benefit wages based on working hours, which reflected the distribution mode of more work and more pay, rationally distributed employees' income and fully mobilized employees' enthusiasm, and achieved certain results.
Give full play to the basic moral quality of employees in the activities of creating spiritual civilization. The workshop uses newspapers, periodicals and other forms to educate employees. Actively organize workshop workers to respond to various collective activities organized by the company and the workshop, such as "celebration" long-distance running, "March 8" rope skipping race, mixed race, etc. These activities are beneficial to workers' body and mind, can enhance their collectivism and sense of collective honor, and fully mobilize their enthusiasm and creativity.
Second, the outstanding problems and deficiencies in the work
1. With the development of enterprise scale, the production and equipment maintenance of various processed parts are increasing day by day. With fewer people and more tasks, there are more emergency treatment and temporary tasks, which disrupts the normal production arrangement.
2. The workshop introduces new equipment and technology, and the employees have not received systematic training, so it is still difficult to maintain the equipment. I hope that the company will focus on the professional training of skilled workers in the future vocational training, so that skilled workers can have the opportunity to learn new technologies and knowledge, improve their overall technical level and make more contributions to the company.
After years of operation, the equipment has been aging. Although it has been maintained for a long time, it can not achieve accuracy in work, which affects the quality of the workpiece.
4. The secondary distribution scheme needs to be constantly improved and strengthened to reasonably reflect the distribution form of more work and more pay.
Three. work arrangement
1. The market situation facing the company will be more severe. We will continue to overcome the difficulties with the company, pay special attention to the ideological education of employees, and strive to do our own job.
2. The machine maintenance department will continue to focus on safety production, conscientiously implement the production operation plan issued by the company and the workshop, give priority to safety production, and complete the production plan issued by the superior with good quality and quantity.
3. Arrange the job site reasonably, and continue to implement "5s" management in site management to realize cleaner production. Strengthen the beautification of the workshop working environment, so that employees can work comfortably in a clean environment.
4, maintain all the equipment in the workshop, so that it can keep efficient operation ability at any time.
5, continue to strengthen the construction of the workforce, improve the combat effectiveness of the workforce, and bring the management level to a new level. Strengthen staff training. In view of the fact that the professional quality and ideological quality of the staff need to be improved at present, we will continue to take theoretical training, on-site training and skill assessment for training next year.
6, continue to deepen the reform of the secondary distribution system, and adjust according to the situation in the implementation process.
Mechanic's personal year-end summary 5 This year is coming to an end. In this year's work, under the leadership of leaders at all levels in the company and workshop, I strictly abide by various rules and regulations and demand myself from all aspects. Always adhere to the actual situation of the workshop as the starting point, to ensure the normal operation of equipment as the premise, to minimize maintenance costs and shorten maintenance time as the goal, and constantly learn and summarize work experience and lessons. Constantly improve their professional ethics and skills. Thus, various tasks were successfully completed in a series of challenges, which laid a good foundation for all departments of the company to complete various production tasks on time. In order to always serve the logistics forces and ensure the normal operation of all departments. The work of this year is summarized as follows:
First, strengthen management to ensure safe and civilized production.
"Safety first" is the basis of enterprise production and the premise for us to do all the work well. There are 68 people in our machine maintenance department (including 10 silicon rectifier), who are mainly responsible for the repair, maintenance and maintenance of various mechanical equipment in the workshop, with a wide working area and many operating points. Safety in production is particularly important for our mechanical maintenance. To this end, I summarize the experience and shortcomings of the previous day's work at the daily pre-shift meeting, correct the problems in time when found, and widely publicize the importance of safety production, always remind and urge workshop members to pay attention to safety, so as to nip in the bud, put an end to violations and make the safety alarm ring. And formulated the safe operation system of the workshop section. Adhere to the daily "three no injuries" and weekly workshop safety study, aiming at enhancing the sense of security of all employees, strengthening the sense of responsibility at work, and putting an end to carelessness and luck. Lead everyone to carefully find out the hidden dangers and hazards around them, nip them in the bud and put an end to safety accidents. At the same time, I also actively participate in various safety activities organized by the company. And implement all activities to everyone in the workshop, and put safety work first in all work.
Second, strengthen the construction and management of road sections.
At present, the management of this workshop is faced with many complicated factors, which brings a lot of passivity to the management of the workshop. There are also many problems in management, such as uneven quality of personnel, low professional level, imperfect technology, lack of attention to learning and weak sense of responsibility. In this situation, we should strengthen the theoretical study of workshop members, better master the operation skills, improve their own quality, deal with problems in a timely and decisive manner, be brave in taking responsibility, give play to team effectiveness and tacit communication, and let workshop members make more suggestions to contribute to workshop construction. Cultivating a team of mechanics with both ability and political integrity has always been one of my priorities. Therefore, the training and learning of workshop members has always been the top priority, and unremitting efforts have been made. At the beginning of the year, training courses on theoretical knowledge of various types of work were held. The maintenance workshop has the largest number of technicians in the company. Give full play to the role of technicians, lead workshop members to actively learn job skills and actively participate in mass "QC" activities. Small improvements have been made in the aspects of oil leakage of reducer and hydraulic oil leakage of disc, and certain results have been achieved.
Third, overcome difficulties and promote the full completion of production tasks
This year, our workshop ensured the normal operation of the equipment. Except for normal shutdown, there was no shutdown due to improper management, and the equipment operation rate reached over 99%. Moreover, a lot of work has been done in related technology and safety transformation, and the task has been completed with good quality and quantity. Overhaul, electrolytic overhaul and various emergency repairs of 5# and 3# anode furnaces, especially in this year's environmental protection technical transformation work, can better reflect the tenacious style of workshop members who are not afraid of hardship and fatigue. After receiving the maintenance task, I broke the previous maintenance mode, set up several working groups, and arranged the backbone as the team leader. We in Qi Xin work together, unite as one, work continuously for more than 10 hours every day, and fight in our respective posts. For a long time, the tired figure always appeared on every employee, but no one asked for a day off and no one complained that he was tired. Finally, with the efforts of workshop leaders and all employees, the technical transformation task was successfully completed. This spirit and working attitude, I will lead all the members of the mechanic group to continue to carry forward in the future work.
Fourth, strengthen management and control costs.
Advocating "saving glory, wasting shame", saving is to create profits, protect the environment, is the core competitiveness of enterprises, but also the key to success or failure of enterprises! Saving is a national policy, a responsibility, a habit, a quality and a virtue. Our goal is to improve the utilization rate of resources, pay attention to energy saving, electricity saving and material saving, strengthen the concept of saving, improve the saving measures and create an economical workshop. In this year, nearly ten tons of scrap steel was used as dust removal pipeline and pipeline support, flue reinforcement support frame and circulating water transformation; ; Scrap screws, nuts, shafts, etc. Be treated and reused; Welding anode slag scraper etc. Use waste materials.
Five, strengthen the construction of spiritual civilization, enrich the cultural life of the workshop.
In the activities of creating spiritual civilization, workshop members are encouraged to actively contribute to the trade union, and the workshop will give rewards. At the same time, we encourage everyone to actively respond to all kinds of collective activities organized by the company and the workshop, such as "May Day Activities", "Mid-Autumn Festival Activities" and "Eleventh Activities". These activities have enhanced the sense of collectivism and collective honor of workshop members.
Six, strengthen their own learning, improve the level of business.
Because I feel that my burden is very heavy, and my knowledge, ability, experience and position are far from each other, I have never dared to treat it lightly. I have been studying, learning from books, learning from leaders around me and learning from colleagues. So I think I have made some progress in the past year. Through continuous study and accumulation, I have gained work experience, and I can handle all kinds of problems calmly in my daily work. After one year's training, my organizational management ability, comprehensive analysis ability and coordination ability have been greatly improved, which ensures the normal operation of all work in this position, can treat all tasks with a correct attitude, love my job, and strive to implement it in practical work. Actively improve their professional quality, strive for the initiative in work, have a strong sense of professionalism and responsibility, and strive to improve work efficiency and quality.
Looking back on the coming 20XX years, although some achievements have been made, everything can only represent the past. Although the mechanic section has achieved the achievement of "advanced environmental protection section", we should redouble our efforts in the future work, learn from each other's strong points and make the section better, so as to win more honors for the company in the future. 20 12 year work plan:
1, will continue to focus on safety in production, conscientiously implement the production and operation plans issued by the company and the workshop, give priority to safety in production, and complete the production plans issued by the superior with good quality and quantity.
2. Arrange all work reasonably, strengthen the implementation of "5S" management in field management, and realize clean production. Strengthen the beautification of the working environment so that employees can work comfortably in a clean environment.
3. Maintain all the company's equipment to maintain its ability to operate efficiently.
4. Continue to strengthen the workshop construction, improve the cohesion and combat effectiveness of workshop members, and raise the management level to a new level. Strengthen the study of workshop members. In view of the fact that there are many young employees in the workshop at present, and the technical level is uneven, we will continue to intensify our study next year through technical competitions, on-site training and skill assessment, and intensify our work in energy conservation, waste utilization and equipment operation rate. In the future work, we will constantly sum up our work experience, improve our working methods, flexibly use various resources according to the actual situation, and improve our work enthusiasm. Combined with the actual development of the workshop, overcome all difficulties, strive to ensure the normal operation of equipment, reduce maintenance costs, improve work efficiency, and cultivate a maintenance team that meets the needs of the company's development and has excellent comprehensive quality.
;