How to disassemble Santana heater tank

Disassembly method of Santana warm air water tank: drain the coolant in the cooling system, remove the control panel, separate the cable fixing piece on the left side of the warm air device, and remove the screw on the wire terminal. Unplug the wire connector behind the blower motor, disconnect the vacuum tube and lamp wire behind the heater control device, and disconnect the heater water supply pipe behind the cylinder head.

Scale cleaning method manual cleaning method

It is necessary to disassemble the car water tank and remove the scale with a hammer, scraper and shovel. The descaling efficiency is low, the labor intensity is high, it is not easy to clean, and it is easy to cause secondary damage to the water tank. Ordinary scale cleaning agent: The water tank needs to be dismantled, and it is not completely removed. It has a strong smell and strong corrosiveness, which is easy to cause the water tank to age and shorten its service life.

Professional descaling agent for automobile water tank

It can be cleaned without disassembly or shutdown. The special scale remover can be directly poured into the automobile water circulation system. After soaking, idling or driving for 20-30 minutes, the scale remover in the water tank and system can be discharged. By washing with water repeatedly, the scale, rust, mud and various harmful substances in the engine water circulation system can be effectively removed.