The socket is flooded. What should I do? Will it catch fire? How long does it take to air dry naturally? I am a girl. I dare not blow dry. It's rainy recently.

Let's just say it's possible When the socket on the wall is flooded, it will cause the socket to be short-circuited. If there is a leakage protector, the leakage protector will trip and automatically cut off the power supply; If there is no leakage protector, it may cause a fire in the case of long-term short circuit.

Solution to water inflow in socket:

1, cut off its power supply.

2. If there is a lot of water, remove the socket, clean it with cotton cloth and paper towel, then let it stand for about three days (longer in winter and shorter in summer), or blow dry it with a hair dryer.

3. If the water intake is small, you can stop using it for about three days (longer in winter and shorter in summer), or use a hair dryer to dry it.

Precautions:

1. The socket should not be installed in a hot and humid place, but in a dry and clean place. The height of exposed socket shall not be less than 1.8m, and the height of concealed socket and industrial socket shall not be less than 30cm.

2. The rated current of the plug should be greater than the load current, and the sockets with different voltages should have obvious differences and cannot communicate with each other.

3, all portable or mobile electrical equipment with socket, a single corresponding to repel three hole socket, three corresponding to use four-hole socket, its grounding hole should be connected to the ground wire or zero line.

4. Safe sockets should be used for sockets in children's activity places; If ordinary sockets are used, the installation height should not be lower than1.8m. ..

5. It is not allowed for two or more electrical appliances to share a plug or two pairs of plugs to be plugged into the same socket to prevent short circuit or burn out electrical appliances.