How to change the heater water tank of Jieshi car?
1. Remove the wiper blade and the water storage tank cover. Because there is a fixed line of the workbench behind the wiper motor, the wiper motor should also be removed.
2. The three bolts in the fixing groove are used to fix the workbench, and all of them have been removed.
3. Remove the warm water pipe connector and the fixed cover plate connected to the warm water tank. If there are two bolts on the firewall to fix the air box system in the car, they should be removed together.
4. Remove the two bolts at both ends of the internal workbench, and then remove the fuse box cover, steering wheel cover, instrument panel and housing in turn.
5. Remove the player, ashtray, tuyere, fixing frame and the sundry box in front of the co-pilot, and remove the screws connecting the workbench inside.
6. Remove the headlight switch and wiper switch, remove the two screws that fix the steering wheel wire and the workbench, remove the decorative plates on the left and right sides of the steering wheel, and unplug the switch plug.
7. After removing all the screws on the workbench, hold the wire harness and pull the workbench outward. Make sure that the left and right forces are balanced, and then take out the workbench.
8. Remove the wire harness fixing wires on the bellows assembly, unplug the plug that gets in the way, remove the three fixing wires on the bellows assembly, gently shake them to the left, and take out the heating mechanism assembly for installation.