What is the installation method of diesel preheater?

Pacific Auto Network first determines that the fixed position of the preheater is at least 20-40cm lower than the water tank cover, determines the series position, cuts off the warm air pipe, connects the water inlet of the preheater with the hose with lower incision, adds antifreeze until the antifreeze flows out from the water outlet of the preheater, connects the water outlet of the preheater with the slit hose, and locks the hose.

The automobile preheater realizes that the automobile does not need to be heated in winter, and eliminates the trouble of difficult starting after parking in winter. Even in the cold of MINUS 30 degrees, you can start at will and travel at any time. When the car reaches the starting temperature, it will automatically stop heating up and the power indicator will automatically go out.

Installation location and requirements:

1. The fixed position of the preheater should be at least 20-40cm lower than the water tank cover, so that the preheater will not be damaged by dry burning due to lack of water.

2. The distance between the installed preheater and the automobile fuel pipe and brake pipe shall not be less than 10 cm.

3. The outlet of the preheater should be higher than the inlet.

4. The water inlet of the preheater can be connected with the drainage hole of the vehicle body, and the water outlet of the preheater is connected with the warm air inlet pipe.

5. The preheater can also be connected in series on the warm air pipe or small circulation pipe. (Photo/Text/Photo: Pacific Auto Netscape Chen Chen)