The location of Honda crv water tank, how to add water to Honda crv water tank?
In front of the engine
1, radiator should not be in contact with any acid, alkali or other corrosive substances.
2. It is recommended to use soft water and soften hard water before use to avoid internal blockage and scaling of radiator.
3. When using antifreeze, in order to avoid radiator corrosion, please be sure to use long-term antirust antifreeze produced by regular manufacturers and in line with national standards.
4, in the process of installing the radiator, please don't damage the radiator belt (film) and hit the radiator, to ensure the heat dissipation ability and sealing.
5. When the radiator is completely drained before adding water, turn on the drain switch of the engine cylinder first, and then turn it off when there is water flowing out to avoid blisters.
6, in daily use should always check the water level, stop using water after cooling. When adding water, slowly open the water tank cover, and the operator's body should be as far away from the water inlet as possible to prevent high-pressure steam from spraying from the water inlet and causing burns.
7. In winter, in order to prevent the core from being damaged due to freezing, such as parking for a long time or indirectly, all the water should be drained with the water tank cover and the drain switch.
8. The effective environment of standby radiator should be kept ventilated and dry.
9. According to the actual situation, the user should thoroughly clean the radiator core within 1~3 months. When cleaning, rinse with clean water in the opposite wind direction. Regular and thorough cleaning can prevent the radiator core from being blocked by dirt, which will affect the heat dissipation performance and service life of the radiator.
10, the water level gauge should be cleaned once every 3 months or according to the actual situation; Remove all components and clean them with warm water and non-corrosive detergent.