China Naming Network - Naming consultation - How to install the rotating wardrobe Installation steps of the rotating wardrobe

How to install the rotating wardrobe Installation steps of the rotating wardrobe

Rotating wardrobes, also known as rotating hangers, were not so many products in China before. In China, only Panasonic of Japan has a small number of trial products. However, with the development of science and technology, people's pursuit of the quality of life at home and the requirements of space decoration, rotary clothes hangers are gradually becoming popular in China. Let's take a look at the installation steps of the rotating wardrobe!

First, the characteristics of the rotating wardrobe

1. Just push the rotary hanger, all the clothes will be clear at a glance, and there is no need to rummage through the closet to find clothes. In addition, compared with the general double-door wardrobe, the rotary wardrobe is also very space-saving, because the double-door wardrobe should leave at least 120 cm opening or aisle to take clothes, while the rotary wardrobe only needs 80 cm or even 60 cm to take clothes, which can save space for the decoration design of the room.

2. The rotating shoe cabinet can be large or small, can be replaced at any time according to the owner's needs, and can also put shoes on both sides, which is full of convenience. Intimate rotating design increases capacity and space.

3. The revolving wardrobe has two rows of storage space, which can be used to hang clothes. There is also a folding storage space under the wardrobe. The focus is on matching clothes. As long as you turn around, all clothes can be presented. The shoe cabinet is also designed with the function of rotation. After opening, the storage capacity is huge, which can hold 45 to 54 pairs of shoes for the hostess. The original design with a 45-degree oblique angle doubled the storage space. In addition, the laminate is also movable, so as long as it is removed, the woman's boots can be put down.

Second, the size of the rotating wardrobe

The general size of the rotary wardrobe is customized according to the size of its home environment, and of course there are also customized sizes on the market. The rotating wardrobe has different specifications such as mini, medium and large, which can meet different space lengths. Whether it's the renovation of the new wardrobe or the old wardrobe, it's extremely convenient to install. Every model and brand of revolving wardrobe is different.

Third, the installation steps

1, solid nail on cork

It is fixed on the wide side plate, with the big handle hole of the top plate facing upwards, the other solid plates facing downwards, and the big handle hole of the crural line facing inwards (the height of the middle solid plate layer is the same as that of the L-shaped frame, that is, the distance between the bottom plate and the solid plate layer is 960mm, and the hole of the laminated plate is drilled on site). Put the side plates and nail the cork, which is needed to connect the solid layers on both sides. Install a double link on the physical layer of the second cabinet. Note that the big handle on the double connecting rod can only be locked in half, that is, 90 degrees. When the two solid layers are fixed to the side plate, tighten the big handle at the same time. When installing the third cabinet, repeat the installation steps of the second cabinet.

Step 2 nail the backboard

Place the installation surface of the whole cabinet on the floor with a padded cloth, and pad the side plates to the same plane. Measure the diagonal dimension of the cabinet with a ruler, adjust it to be equal, and install the first backboard from the wide measuring board. Note that if there is a solid nail in the middle, draw the center line of the solid layer with a pencil first, and then nail it.

3. Installation of L-shaped frame

Draw a parallel line on the corresponding side plate with the side plate of the L-shaped frame, then move up by 9mm to draw the center line of the three-in-one colloidal particles, draw a parallel line on the corresponding bottom plate with the top shift of the L-shaped frame, and draw the center lines of three 9mm colloidal particles on the flat line. Use 10mm drill bit to drill a hole with a depth of 10-20 mm, and install a single rod. After the L-shaped frame is installed, it is fixed on the backboard with nails.

Clean up the sundries in the installation position of the wardrobe, with one person standing on the left and one person on the right. The wardrobe leans back slightly, lifts it hard and moves back to the required position. Be careful not to scratch the floor and walls.

4. Install three sections of track

The rail abuts against the drawer and is flush with the drawer floor. Move the mother rail to fix the sub-rail screw and install it on the vertical eye of the sub-rail (this is adjustable). Add 2mm clearance between the two drawer panels and the center of the rail eye. Remove the bus guide rail and draw a 90-degree crosshair on the side panel of the cabinet according to the measured data. This crosshair is the center eyeliner of the bus track. The drawer panel is inserted into the column, so draw a vertical tangent 19mm from the outside of the cabinet side panel, the bus rail is flush with the vertical tangent, the center eye is flush with the horizontal line, and the screws are installed on the horizontal eye of the bus (adjustable). After the drawer is installed, it can be adjusted by adjusting the position, so that the surface of the drawer is flat and the gaps around it are even. Finally, the fixing screws are installed on the horizontal holes of the auxiliary rail and the vertical holes of the bus rail. And so on to install the next one. If it is a full drawer, the same principle can be installed from bottom to top, and the top drawer can be fixed with a 90 angle code. The premise requires that the pumping surface is flat and the trainees are even. The drawer gap is 2mm.

5. Installation of push-pull rearview mirror

Install three rails on the push-pull mirror, and the height of the push-pull mirror is generally above the bottom solid layer 1700mm (the height can be requested by customers). According to the required height, draw the track horizontal line with a 90 square on the side plate. Measure the parallel distance of the new eye in the three tracks on the line and get accurate data. Draw the horizontal line of the track with a 90-degree square on the side plate. Install the push-pull upper and lower bus rails, with the bus rails 5 mm away from the backboard, and install the push-pull rearview mirror.

Four, the installation of rotating wardrobe should pay attention to:

1. Pay attention to the size when installing the wardrobe.

Before the wardrobe is installed, the designer must come to the door to measure the ruler, and the position, size, internal structure and the effect after installation must be communicated with the customer. If the customer's home decoration is not completed, it is also necessary for the customer and the decoration supervisor to make an agreement on some unfinished decoration projects that may affect the placement and installation of the wardrobe. For example: power switch, socket location, air conditioning installation location, whether there is plastering line, foot line, floor laying thickness, whether the site installation location is enough (or standing installation) and so on.

2. It is necessary to pay attention to safety when installing the wardrobe.

Safe. Health and safety are of vital importance to people. The beauty of wardrobe mainly lies in sliding doors. Many beautiful sliding doors are made of art glass, so there is a safety problem. Glass sliding door, don't overdo it. First, safety. Second, the installation is convenient.

3. Pay attention to feng shui when installing a wardrobe.

Light-colored wardrobe brings bright space and bright living space, which can bring good mood to the owners. The choice and layout of the bedroom wardrobe can be determined according to the orientation of the bedroom. If the bedroom doors and windows face north and the lighting and ventilation are poor, it is best to choose a light wardrobe. Try to put the wardrobe in a dark corner, not next to the window or bedroom door.