Self-evaluation of mechanic employees

Self-evaluation of machine repair employees

Machine repair, that is, machine maintenance. In some factories, machine repair is also a maintenance worker, maintenance technician, maintenance worker, and maintenance technician. Here is me Let’s take a look at the compiled self-evaluations of mechanics employees.

Self-evaluation of mechanical maintenance employees Part 1

In the past xx years, under the leadership of the branch leaders and the surface section chief, we have gone through the ** of the worker colleagues * I have worked hard together, and through my own active efforts, I have done a lot of work and achieved certain results. I would like to thank my leaders and colleagues for their trust and care. Let me talk about my thoughts and experiences last year. I have been assigned to the remanufacturing branch. , I trained for a period of time first. During this period of time, I studied hard. After watching videos and listening to the leaders’ speeches, I improved my thinking and understanding of the engine. The remanufacturing construction project is the development of our factory. It is an excellent opportunity and an important project to improve employee income and increase employee benefits, so it must be constructed well.

Although I am older, I must learn the knowledge of remanufacturing engines and lay a solid foundation for future production. During the basic construction period of remanufacturing, I participated in the construction of steam pipelines, welding gantry frames, and building Wall support of steam pipes, insulation layer, etc., participated in the unloading, unpacking and positioning of equipment, installation and adjustment of level, other large and small equipment, xx sets, etc., also participated in non-standard and tooling manufacturing In the work, we have produced large and small work clothes, more than xx sets, and achieved certain results. In these tasks, we can obey the leadership's arrangements, take the initiative to take the lead, leave no stone unturned, do our work well, unite our comrades, and work hard. Together with the workers, we completed various tasks in unity and cooperation. In the initial manufacturing process of the transfer trolley, I could play a backbone role, carefully analyze the drawings, and determine the production method. For example, when making the handle of the trolley, I had to plan to buy it. Welding steel elbows, Zhang Mingji and I discussed and made a simple pipe bender. According to the drawings, the handlebar of the trolley was completed. It was very beautiful. During the production of the trolley, we made several small toolings. To process the parts of the trolley, such as the U-shaped trolley traction plate, the 20mm thick round steel for hanging the crankshaft needs to be bent into 120 semicircular hooks with a diameter of 100mm. It is very tiring and time-consuming to use acetylene oxygen or manual bending. I made a small tooling and bent it into a semicircle in half a day. During the entire production process of calculating the dimensions of each part of the car, there were very few errors, so the entire production process of the car was completed smoothly. On a hot day, I worked with my co-workers. We spray paint the car together and are able to do all kinds of work. We can all play an independent role in the entire process of unloading equipment and placing equipment in place, as well as installation and adjustment.

In the non-standard manufacturing process in the second half of the year, we were able to complete various tasks assigned by the leadership on time. We built a flip frame, x sets, a crane for installing the paint room, x sets, and made a crane column for the furnace. and the girder, a crane for installing the nitriding furnace. In this process, the crane girder has not been made before, and there are certain technical requirements for the crane girder. After the welding was completed, it did not meet the specified technical requirements and underwent flame correction. , using the principle of thermal expansion and contraction, it has reached the size required by the technology and completed the task of making the crane girder. In the process of repairing the old and recycling them, the previously abandoned heating pipes were used when welding the steam pipes. We made a large frame for steam pipes to cross the road. When making the columns of the thermal crane, we also used the abandoned heating pipes, which saved a lot of costs. When doing various tasks, we obeyed the leadership's assignments and actively Actively find ways to complete various tasks, welded anti-theft windows, anti-theft cages for condensers, and anti-shock fences for transformers, abide by various rules and regulations, work conscientiously, and continuously improve their quality. The professional ethics of dedication and dedication are the guarantee for the smooth development and ultimate success of every job. In one year, I was able to abide by the rules and regulations of the factory, do my job conscientiously, and never be late or leave early. I completed every task actively and conscientiously with enthusiasm, and conscientiously performed my duties. Responsibilities, unite colleagues and continuously improve one's teamwork spirit in daily life.

In the work next year, I will continue to work hard to correct and make up for my shortcomings and defects in a timely manner. Make greater contributions to the development of remanufacturing.

Self-evaluation of mechanical maintenance employees Part 2

I left school in July 20xx and worked as a mechanical technician after a simple internship in the company's equipment department. Mainly responsible for the management of some equipment on site. There are mainly large and small equipment such as electric single-girder cranes, gantry cranes, steam boilers, high-frequency vibrators, etc. Although I studied mechanics in school, I still know very little about the mechanical equipment on site. , so everything needs to be learned from scratch.

On-site mechanical equipment plays a decisive role. The good operation of mechanical equipment not only directly affects the production progress of the site, but also has certain safety risks in large-scale equipment, so the management of mechanical equipment is also very important. As a newly graduated girl, I feel that the burden on my shoulders is very heavy, the pressure is great, and the difficult working environment made me feel withdrawn. In order to hone myself and learn more, I finally chose Persevered.

My daily job is to go to the site and inspect all the equipment to check if there are any faults or hidden dangers. If there is a fault, I quickly call the maintenance worker on the spot to deal with it immediately and ensure that the equipment is up and running in the shortest possible time. Normal operation seems to be an easy task, but in fact it is not that simple, because the good operation of the equipment closely affects production and may even cause great economic losses. Among all the equipment, the three types of equipment that make me most fearful are the electric single beam, gantry crane and steam boiler. My nerves are tense every day. In order to reduce failures and detect hidden dangers early, I check these large equipment every day and organize personnel to schedule regular inspections. Carry out lubrication and maintenance, conduct monthly safety inspections, and keep relevant records. With the help of colleagues and co-workers, I gradually became familiar with it from being unfamiliar at first. In addition, there were many experienced old workers on site, and I was nervous. The rotation finally relaxed a little, but the equipment on site still often breaks down. The special equipment is the electric single beam. The electric single beam often derails during operation. Part of it is due to the uneven installation of the track, and part of it is due to the operator's attention during operation. Instead of concentrating, we dealt with the faults one by one according to the cause, and strengthened inspection and maintenance. Later, the work gradually got started, and the number of faults of electric single beam and other equipment gradually decreased, ensuring the normal operation of on-site equipment.

Although the past six months have been hard, it feels very worthwhile. First of all, we, the flowers that have been living in the greenhouse, have gotten some exercise, learned about the hardships of life, and tempered my will to endure hardships. This is the first great fortune I have gained after graduation, and it will also be another turning point in my life journey.

Time flies, everything last year is still vivid in my mind, but it has been a year since now, and I have transformed from an ignorant and fearless yellow-haired girl who just stepped out of school into a steady and down-to-earth girl. Looking back on this year The journey has been ups and downs, crying and laughing. It seems to be very smooth, but it is also full of a little thorns, but it is also smooth. This is just the beginning. The road ahead is still long, and there are many unknowns waiting for me. In the future, whether in life or at work, I will continue to learn, work tirelessly, constantly improve myself, and reflect my life value in the journey of life! Self-evaluation of mechanics employees Part 3

Along with the relatively compact but not too nervous work rhythm, 20xx is coming to an end. After this year of not too busy work, I have a lot of feelings. I realized that a good memory is not as good as a bad writing, so I must write down some of my shallow experiences in simple words.

I accept the word work subconsciously. Since I graduated from school in July, I came to the company to work with a childish attitude. From being confused about the working environment at the beginning, to later imposing the concept of work into his own concept, he rose from the front line of the branch factory to the production management of the manufacturing company, and slowly established an overall perspective from a college graduate with a narrow vision. I am growing up step by step in my systematic concept.

1. Learn business knowledge and do your job well

From January to July 20xx, I studied thermal power production management methods in the special power unit. Due to my lack of motor knowledge and management knowledge, I showed blindness and passive rejection of work in the early stage, which caused great obstacles to my job learning. Later, with the timely guidance of the leader, and with my own in-depth understanding of the products at the production site, after several ideological adjustments, I gradually adapted to the work rhythm and working environment of production management.

Since my major is mechanical design and manufacturing, I have some theoretical understanding of mechanical processing. I quickly became familiar with the machining of the main components of the steam engine, and I also learned about the main equipment of each branch factory. I also have a preliminary understanding. Slowly, by going to the production site to study and observe every day, and then combining it with professional process route sheets and drawings, I began to have an overall understanding of the various components and assembly of the steam engine. In this way, I had a preliminary understanding of the product. Got it.

After understanding the product, the next step is management. The manufacturing branch is the core management department of the production system. Production planning is the soul of the smooth development of production. Making a good production plan is also an essential quality for a production manager. An excellent production plan must have good executability, a reasonable and objective production cycle, and the ability to correct deviations. To make such an excellent production plan, as a production manager, you must first understand the process route of the product, and then based on the equipment capabilities and staffing conditions of the branch, you must also be able to predict emergencies in actual production and make comprehensive judgments Production cycle, and during the execution of the plan, it is necessary to track and correct deviations in a timely manner. After having the ability to prepare production plans, if we want the plan to be implemented in the branch factory, in addition to the high quality of the plan itself, we need to have good communication and coordination skills. Because there are great differences in age, personality, and cultural level among the managers of the branch factory, coupled with their regional and cultural differences, they have different ways of handling things. This requires us to learn and learn more Correct communication among different types of personnel, and in the process, they constantly sum up experience and continuously enhance their coordination abilities.

Of course, if you want to be an excellent manager, you must also master commonly used modern office software and learn other excellent management methods. In this regard, in addition to learning some commonly used text and image processing software, I also started to come into contact with some professional production management books under the care of branch leaders.

Although I have achieved little success now , but it will be of great help to my future development.

2. Connect theory with practice and grow in practice

No matter how rich our theoretical knowledge is, we must eventually return to practice, because the work itself is practical.

When talking about integrating theory with practice in the past, we would subconsciously understand it as transforming written theoretical knowledge into passive actions. It was only after I started working that I discovered that my previous ideas were one-sided or metaphysical, because my previous thinking was based on complete theory without any real contact with practice, which resulted in weak and fragile understanding. It wasn’t until I slowly came into contact with actual work and dealt with some problems at work that I discovered that theory and practice actually complement each other. The ability to combine theory with practice should be subjective, and theory and practice are a long-term process. The process of mutual transformation. Our practice needs to use theory as the cornerstone, and then explore and implement it on the theoretical basis; and we continue to summarize and think during the practice process to supplement our theoretical knowledge with fresh nutrition. Theory and practice are a long-term process of mutual transformation. They are not frozen in a day. After a long period of practice, I have made significant progress in formulating plans and handling and coordinating matters at the branch factory. Every time I encounter difficulties, I humbly ask others for advice, and afterwards I summarize and constantly improve my own work. Although the methods and methods are still immature and rough at present, I will continue to practice and improve in my future work.

3. Strengthen ideological and cultural construction and improve overall quality

As a new member of the manufacturing branch, I will also be a new force in the future, and I deeply feel the great responsibility on my shoulders. The leaders of the branch often teach us to learn more knowledge, participate in various activities, and exercise our abilities in many aspects to improve our quality.

I usually maintain the habit of reading, reading Chinese classical masterpieces and some modern and contemporary inspirational books. I also insist on writing and regularly submit articles to the company radio station, the Youth League Committee and other organizations. I also actively participate in various cultural and sports activities carried out by the company and take them seriously.

4. Put forward your own suggestions in response to the difficulties encountered at work

In the long-term work, through actual handling of various production problems, I found that there are still many problems Facts or problems that hinder production:

For example, parts are completed on time but cannot be sequenced in time. The branch factory often delays the handover time on the grounds that there is no delivery vehicle or the vehicle is running. Especially when it comes to parts that are transferred to downstream branches, untimely transfer often becomes an important factor that hinders production. Take the machining sequence of a part as an example: ① The part is completed in one day, but it is transferred to the next sequence three days later; ② This part is completed in three days, but it is transferred to the lower sequence one day later. On the surface, it seems that the first case is completed in time than the second case, but in both cases, the time to reach the next order is four days, and the hindrance to production is the same. If the equipment and personnel are tight, the obstacles caused by the first situation will be even worse, because if the work needs to be completed in a short time, the equipment and personnel will be occupied, causing obstacles to the processing of other urgently needed parts.

During this period of many months, I should calm down my mentality, treat it calmly, not rush for success, seize every learning opportunity now, and let myself accumulate little by little. , Make full preparations for taking over projects in the future.

After I become the project leader next year, I still have to maintain this learning attitude, consult more with seniors, summarize more in practice, and form my own set of efficient and reasonable work management methods, and strive to complete the power station projects they are responsible for well and quickly.

While constantly improving your ability in production management, you must also urge yourself to learn technical knowledge, go to the site more often, consult with branch technicians and operators, and learn to judge products by yourself. For problems that arise during the production process, you must even learn to think and propose solutions to the problems yourself, and strive to become a comprehensive development manager on the production line.

After this year of work and study, although I have many feelings and gained a lot, I am ashamed of my poor writing style and lack of ability to think about problems. I really cannot express them one by one in concise and clear words. The above thoughts If there are still some inaccuracies and omissions in the speech, I sincerely ask the leaders to criticize and correct them. ;