How to connect the heater water pipe

The connection method of the water pipe of the heater is: connect the inlet and outlet pipes of the heater, then open the valve.

The electric heating fan should be installed away from flammable, explosive and other dangerous items and gases. The electric heating fan heater should be installed in a dry indoor location that is protected from rain, snow, and moisture. The electric heater should be installed in a well-ventilated location and should not be used in a sealed box. The air inlet of the location where the electric heating heater is installed must not be blocked.

The air outlet should be connected with piping covered with insulation material. Note that the piping should not be too long, thin, or bent too much. When installing the electric heating heater, the air outlet must be tilted up 15° and down within 10°, and the left and right inclination of the body must be within 15°. It is not safe for the heater and electric heater to come into contact with water and other moisture.

Extended information:

The use of heaters is introduced as follows:

The heaters in tall spaces should be placed on the flat ground or fixed on the wall using brackets. To ensure correct installation, be sure to check the technical information on bracket load-bearing. Wall installation: If the heater in a tall space is installed on the wall, it must be placed 1.8 meters above the ground. The distance between the heater and the ceiling and side walls of tall spaces should be no less than 20 cm.

First fix the bracket on the wall, and then install the heater. Remember that the heater in a tall space cannot be placed close to the wall, as being close to the wall will block the smooth air flow and easily cause a fire.

People's Daily Online - Everyone loves heating equipment in winter, but you must also pay attention to its safe use

Ifeng.com - It's great, I saw this heater before winter