Poussin coolant replacement steps

The steps for replacing the coolant in Santana are as follows:

1. Turn the car key backward to turn off the engine and power supply.

2. Turn off the engine and let it sit until the water temperature drops to normal temperature.

3. Open the driver’s door.

4. Pull the front flip switch to open the front engine cover.

5. Open and turn forward for stable support.

6. Slowly unscrew the lid of the small kettle and release the pressure in the pipe.

7. Since Santana does not have a drain valve, you can only disconnect the return pipe to drain out the antifreeze, drain it and then reinstall it.

8. Refill the small kettle with antifreeze.

9. Run the engine until the water temperature stabilizes at the normal operating water temperature for a long time, then the antifreeze replacement is completed.