How to rebuild the sewer of an old house
Here are some ways to transform the sewers of old houses:
1. Replace the sewer pipe
If the sewer pipe is aging, leaking or bursting, it needs to be replaced. First, we must find the location and direction of the sewer, and then dismantle the original sewer and install a new sewer. The new sewer pipe should adopt reliable and durable seamless steel pipe or UPVC pipe.
2. Improve the sewer system
For the poor sewer system, it is necessary to find ways to improve the sewer system, adjust the direction and position of the sewer, and try to improve the drainage effect. In addition, ensure that each outlet is equipped with an insect-proof and odor-resistant tap water sealer.
3. Clean up the blocked sewer.
If the sewer is blocked or poorly drained, it needs to be cleaned in time. Cleaning methods can be mechanical cleaning and chemical cleaning. Mechanical cleaning generally adopts high-pressure water or drain pipe cleaning machine, which can effectively remove debris and dirt from sewer mouth. But if the blockage is serious, it needs to be cleaned with chemical cleaning agent.
4. Add waterproof isolation layer
If the sewer is located in the basement or low-lying place, it will often be affected by groundwater and accumulate water. The method of laying waterproof isolation layer on the external wall foundation or ground can be adopted.
To sum up, around the guiding principles of drainage system and the requirements of installation and maintenance, the positions of pipes and drainage pipes should be arranged reasonably, the length of pipes should be shortened as much as possible, and good materials and techniques should be adopted to ensure that the drainage pipes have good drainage and deodorization effects. At the same time, through regular cleaning and maintenance, the service life of sewer pipes can be extended.