119 Fire Games theme event planning plan
In order to ensure a high starting point, high quality and high level of activities, it is often necessary to formulate an activity plan in advance according to the specific situation. The activity plan refers to a planning document formulated for a certain activity. How to write an activity plan to be more effective? The following is a sample planning plan for the 119 Fire Games theme event that I compiled for you. It is for reference only. Let’s take a look. 119 Fire Games theme event planning plan 1
1. Activity theme:
All members pay attention to fire safety and the safety of life and property first. Everyone participates in firefighting to create peace and harmony.
2. Purpose of the activity:
To further promote fire safety publicity work and further increase employees’ enthusiasm to learn fire protection knowledge, care about fire protection work, and participate in fire protection activities.
3. Activity time:
4. Activity location:
XX
5. Activities objects:
All employees.
6. Fire protection publicity:
1. Fire protection pictures and banners hanging for publicity;
2. Fire protection publicity knife flag.
Propaganda of basic fire protection knowledge:
1) How to use fire extinguishers and fire hydrants.
How to use a fire extinguisher:
1. Lift the fire extinguisher with your left hand and pull out the safety pin with your right hand;
2. Hold the nozzle with your right hand and aim the nozzle The root of the flame;
3. Press the handle firmly with your left hand, and the dry powder will spray out to extinguish the fire;
4. When extinguishing the fire, go from far away and sweep left and right until the flame is extinguished. Put out all;
5. When extinguishing a fire, you should stand about 5 meters away from the fire source and stand upwind of the fire source.
How to use a fire hydrant:
1. Open the fire hydrant box;
2. Take out the water hose and connect the water source and water gun;
3. Extend toward the fire source;
4. Hold the water gun and hose and open the valve to extinguish the fire.
2) "Four dos and four don'ts" for self-rescue and escape from a fire
3) "Ten prohibitions" for fire prevention in factory areas
1. It is strictly prohibited to occupy or block evacuation passages , do not pile up debris in corridors, stairways, safety exits, etc.;
2. It is strictly prohibited to misappropriate fire-fighting equipment (such as fire water bags, gun heads, etc.) without permission;
3. It is strictly prohibited to pile objects around fire extinguishers and fire hydrants to cover fire-fighting equipment;
4. It is strictly prohibited to damage fire extinguishers and other fire-fighting facilities;
5. It is strictly prohibited to close safety exit doors without permission;
6. It is strictly prohibited to smoke and throw cigarette butts in places other than those specified in the factory area;
7. It is strictly prohibited to connect wires indiscriminately and change power equipment without authorization;
8. It is strictly prohibited to violate regulations The use of large electronic equipment and safety operating procedures;
9. It is strictly prohibited to burn debris in the factory area and use open flames without approval;
10. It is strictly prohibited for individuals to carry flammable and explosive items in violation of regulations Enter the factory.
4), "Ten checks and ten prohibitions"
7. Specific process of activities
(1) Personal projects:
1. Choose appropriate fire extinguishers according to different fires
Venue: runway length 50m;
Equipment: fire type signs, fire extinguishers;
Participants: 1 person per team
Rules:
(1) Place a sign with the type of fire 25 meters away from the runway. According to the type of fire, choose a fire extinguisher and run to the fire source with the fire type sign. (Simulated fire source) to put out the fire, and then raise your hand to signal the referee.
(2) At the starting point, after the athletes hear the starting gun, they quickly run to 25m to pick up the fire type sign and select the corresponding fire extinguisher.
(3) The fire extinguisher must match the type of fire, otherwise the score will not be counted.
(4) The one with the least time will be ranked.
2) Organize the fire hose
Venue: Set the starting point and end point at the designated location
Equipment: One fire hose and lay it flat on the ground.
Participants: 1 person per team
Rules: (1) One fire hose and spread flat on the ground. Athletes must not touch each other while standing at the starting line. After hearing the starting gun, they quickly arrange the fire hose, lift the arranged hose and run to the finish line. The referee checks whether they pass.
(2) The hoses must not be scattered, and the person and the fire hose must cross the finish line at the same time
(3) The hoses that take the shortest time and are best organized are ranked in order
p>
(2) Multi-person events
1. Bucket relay
Venue: Runway length 50m, width 1.5m; start and end points set up
Equipment: A bucket with a 40cm mark inside the bucket. Fill the bucket with water to the 40cm line
Participants: 4 people from each team, 2 men and 2 women
Rules:
p>
(1) Athletes are not allowed to touch the bucket when it is placed at the starting point.
(2) After hearing the starting command, the athlete quickly lifts the bucket and hands it to the second athlete at the return point. The second athlete runs towards the starting point and hands it over to the third athlete, and the third athlete runs towards the turning point and hands it over to the fourth athlete.
The fourth athlete quickly ran to the finish line.
(3) The water in the bucket must not be less than 20cm, otherwise the score will not be counted.
(4) Throwing or slamming buckets will not count.
(5) The one who takes the shortest time and sprinkles the least water will be ranked.
2. Work together:
Venue: designated location
Equipment: 5 balloons
Participants: 2 people per team
p>
Rules: (1) Two participating athletes face each other for the first time and use their bodies to clamp a balloon. Each person holds their hands behind their backs
and places the five balloons at the finish line in sequence. Complete the required stage by running sideways.
(2) If the ball hits the ground, the referee will release the ball again when it leaves the body and continue the game.
(3) The ones with the shortest time and fastest speed will be ranked
3. Identification of fire-fighting equipment
Venue: Set up fire-fighting equipment area and answer area
Equipment: fire extinguisher, sprinkler head, smoke detector, temperature detector, fire alarm button, sound and light alarm,
Fire broadcast, fire ax prevention, fire water Waiting
Participants: 2 people per team
Rules:
(1) Work in groups, answer all the fire-fighting equipment available, and The names correspond exactly.
(2) The person who takes the least time and the most correct answers will be scored. 119 Fire Sports Games Theme Activity Planning Plan 2
1. Activity Background
November 9 It is a national statutory fire protection publicity day. In order to further promote the "119" publicity and education work, implement the spirit of the "National Fire Safety Publicity and Education Outline" of the Fire Department of the Ministry of Public Security, popularize fire safety knowledge throughout the school, and improve the quality of all teachers and students. To improve fire safety awareness and quality, it is planned to hold the launching ceremony of the "119 Fire Protection Awareness Day" event in xx Province xx City on November 9 and hold a fire protection fun sports meeting on the same day.
2. Purpose and significance of the activity
1) Vigorously promote the "119" publicity and education work
2) Build a fire safety "firewall" project
3) Education through fun, effectively increasing teachers and students’ attention to fire safety
3. Activity time
Morning of November x, 20xx
IV. Activity location
xx University Central Campus Square
V. Participants
1. Provincial and municipal leaders at all levels
3. Mass representatives: about 20 people
4. Others: about 200 college students and firefighting volunteers
5. News media
Six , Interesting sports meeting registration and activity process
1) Preliminary preparation:
The Department of Academic Affairs, Research and Engineering Department, etc. will issue event notices on the school-level website, and registration will be based on the college. Sports teams, each team consists of 3 undergraduate students and 3 graduate students. The registration format is an EXCEL form containing the college, name, student number, and participating items (2 people per team for quick fire-fighting suits, 2 people for knotting safety ropes; 2 people for connecting fire hoses;). Please send the registration before November 3 The management committee is responsible for recruiting and arranging 30 volunteers for this event, and assisting the public office in setting up the site and maintaining order on site. Each college must stand in designated areas in an orderly manner.
2) Specific process:
a. Relevant leaders will speak before the start (10min)
b. Session 1 - Observation:
Firefighting Promotion of various functions of the vehicle and display of firefighting vehicles and fire truck equipment (the fire brigade will carry the equipment and display it, and one person will explain and answer questions); fire descent device escape experience (the fire brigade prepares 2 sets of equipment, and the warrior performance starts from the 5th floor Escape through slow descent device)
Section c 2 - Experience:
Fire lift truck lift-off experience, 10 students who volunteered to participate were selected on site, 1-2 people in each group participated , shot 5 times, protected by fire fighters.
Section d 3—Competition:
First, the fire fighters demonstrated the correct methods of each competition content. According to the pre-registration status, each participating student will go to the competition venue to compete.
e Session 4—Awarding: The leader will comment on the event, award awards, and make a concluding speech.
3) Expected results
The competition venue was enthusiastic and orderly. The students not only cultivated a sense of cooperation in the competition, but also truly learned practical fire protection knowledge, which played a role in publicity and education.
7. Precautions
1. If each team has an emergency, please report it to the nearest volunteer immediately. The volunteer will immediately report the situation to the instructor< /p>
2. Separate the competition area from the audience area with isolation tape. Do not be crowded or disorderly at the competition site to avoid safety hazards
3. Education first, competition second , please strictly abide by the rules and procedures of the competition, and do not use unfair means to win the competition
8. Award setting
One first prize will be awarded to each contestant according to the competition results. , 3 second prizes and 5 third prizes were awarded certificates and prizes; other participants received souvenirs.
9. Competition operating procedures
1. Put on fire-fighting clothing quickly
Venue equipment: mark the starting line on the flat ground, 0.5 meters in front of the starting line Mark equipment lines. Fire-fighting suits are placed neatly in a row in front of the equipment line, with a distance of 1 meter. How to stack clothing: Fold the ring-type safety belt into double folds and place them horizontally on the clothes; fold the top of the fire-fighting suit, align the velcro and flatten it, fold it along both sides toward the back, fold it into two folds at the waist, and fold the collar Turn over to both sides, retract the sleeves into the shoulders to form a cylinder, and place it flat on the safety belt; lay the helmet flat, with the cap badge facing forward, and the top of the hat facing up; put the bottoms on the fire boots and put them behind the tops. The boot heels are flush with the equipment line.
Operating procedures: Upon hearing the "Start" command, the participating team members rub their heels together, take off their shoes, lean their upper body slightly forward, hold both sides of the upper edge of the right (left) boot with both hands, and Bend your legs at the knees, lift your right (left) foot, straighten your toes downwards, step into the boot, and put on the left (right) boot in the same way; then, hold the strap between the tiger's mouth of both hands, put the strap on your shoulders, and stand up Stand up (without suspenders, hold the waistband of your pants with both hands, and stand up straight), fasten the buttons on your bottoms and fasten the Velcro; put your right (left) knee on the ground, hold the right rear edge of the helmet with the palm of your right (left) hand facing down, With the palm of the left (right) hand facing upward, stretch your fingers under the brim of the hat, hook the hat strap, put on the helmet with both hands, and the hat strap sticks to the chin; stretch out the hands without sleeves, and wrap the shirt from the front through the top of the head with both arms. Behind your back, after it is fully unfolded on your body, move your hands slightly forward and inward, fasten the button from top to bottom, and stick the Velcro; hold the seat belt loop with your left (right) hand, pick up the seat belt, and wrap it around Go behind your back, hold the tail of the belt with your right (left) hand, and work together to straighten the seat belt. Put your hands together in front of your abdomen, insert the insertion ring, hold it with your left (right) hand, and pull it forward with your right (left) hand. Tighten the safety belt and insert the bolt into the metal grommet. Take a step forward and raise your hands to indicate, stand at attention and shout "ok".
Operating requirements:
1. The belt should be flat, the front and back lapels should be tied into the safety belt, and the nylon buckles must be glued and aligned.
2. Put your feet on the soles of the boots, tie the seat belt firmly, and leave no gap more than 5 cm.
3. Wear the helmet upright, with the chin strap attached to the chin.
Performance evaluation: The timing starts from the "start" of the order until the participating team members complete all operating tasks and raise their hands to signal "ok".
Those who have one of the following conditions will not be counted as a score: the seat belt plug is not buckled into the eyes; the nylon buckle is not buckled or the bonding length is less than 2/3; the top or bottom buttons are not buttoned.
One second will be added if one of the following conditions occurs: the hat strap is not attached to the chin; the belt is not fastened; the feet are not stepped into the soles of the boots.
2. Tie escape knots on safety ropes
Venue equipment: Place 3 safety ropes on the flat ground.
Operating procedures: Upon hearing the command "Start", the participating team members quickly move forward, lift the ropes and tie knots in sequence. When completed, they raise their hands to signal "OK".
Operational requirements: Correct and skillful movements, correct knotting method.
1. Single eight-character knot
2. Double flat knot
3. Weighing knot
Performance evaluation: follow the order " "Start" until the participating team members complete all the knots and raise their hands to signal "OK".
Anyone who has one of the following circumstances will not be counted as a score: the knotting method is wrong.
3. 65mm internal buckle water hose connection
Venue equipment: On a flat ground 18 meters long and 2.5 meters wide, place a water gun and a 65mm internal buckle on the equipment line A water belt and a water distributor. Mark the equipment line, water distributor stop line and finish line 1 meter, 1.5 meters and 18 meters before the starting point respectively.
Operating procedures: After hearing the command "Start", the participating team members quickly move forward, first shake off the water hose, connect one end to the water distributor interface, connect the water gun and rush out of the finish line, raise their hands to signal and shout "Okay", establish the shooting position.
Operation requirements:
1. The hose should not be out of line, pressed or twisted 360 degrees.
2. The interface shall not be detached or bayoneted, and the water distributor shall not be dragged out 0.5 meters.
3. All actions must be completed within the tape laying line.
Performance evaluation: The timing starts from the start of the order until the participating team members complete all operating tasks, cross the finish line, and raise their hands to signal "ok".
Those who meet any of the following conditions will not be counted as a score: the water hose interface is loose or stuck; the water hose is not connected and the water gun is not connected and the finish line is crossed.
Add 1 second if any of the following conditions occurs: the hose is pressed to the line, the hose is twisted 360 degrees; the water distributor is dragged out 0.5 meters.