How to recover the data after cleaning the Corolla throttle of 20 14 1.6L model?

Turn the key to the second gear, which is the gear where the instrument indicates full light.

Then wait 20 seconds, and then step on the accelerator.

After maintaining 10s or so, release the throttle.

Turn off the ignition switch, pull out the key, and the initialization is complete. Not long ago, Toyota 4S, the oldest brand here, cleaned the accelerator. Look at the throttle reset method used by the master, it is really extremely simple. The master said that it will be OK3 in 30 seconds after pulling out two fuses. Notice that the light green 20W one in the middle is inserted backwards. Now send two pictures to share with you. This picture is on the back of the fuse box cover. Just open the lid and turn it over.

Not long ago, Toyota 4S, the oldest brand here, cleaned the accelerator. Look at the throttle reset method used by the master, it is really extremely simple. The master said that DK will be ready in 30 seconds after pulling out two fuses. Note that the light green 20W one in the middle is inserted in the opposite direction. Now send two pictures to share with you.

This picture is on the back of the fuse box cover. Open the lid and turn it over to see it. The red coil shows the location of the corresponding fuse.