Illustrations of 50 knotting methods
Twenty-five. Fisherman's Knot
Introduction: This knot is very easy to tie, but difficult to untie. Therefore, it should be avoided as much as possible to use it on some ropes with good quality, and it is not suitable to use it on ropes that will be pulled very tightly, because after tightening, it will be difficult to untie.
Purpose: To connect two ropes together, usually two hard and soft ropes.
Method:
1. Arrange the front ends of the two ropes side by side, and tie one rope in a single knot as if wrapping the other rope;
2. Tie a knot on the other side as well;
3. Tighten the two rope ends to both sides.
Twenty-six. Double fisherman's knot
It is most suitable for connecting rope loops or ropes that are often placed (not often untied), because it is not easy to bear weight. Untie.
Method:
1. Increase the number of windings of the fisherman’s knot by one more time before tying;
2. Tie the other side similarly; < /p>
3. Tighten the two rope ends to both sides.
Twenty-seven. Pull knot
It is commonly used to tie shoelaces. Just pull the rope end on one side and it will loosen.
Method:
As long as you pull the rope end of A, the knot will be untied.
Twenty-eight. Bow knot
The most commonly used knot when tying shoelaces is generally called a bow knot; it appears very frequently in daily life, as long as the two ends are pulled The rope ends and knots will be automatically untied. The finished shape is very beautiful and is often used as decoration.
Method:
Twenty-nine. Surgical Knot
As the name suggests, the surgical knot is a knot tied by doctors when suturing wounds during surgery. The surgical knot can also be used to connect two ropes, and its knot is stronger and stronger than the flat knot, so you don't have to worry about it unraveling. It is suitable for using thin and smooth ropes. At the same time, the surgical knot is very suitable for binding. Items such as eiderdown quilts and feather coats are soft and bulky; however, the disadvantage is that they are difficult to untie. The characteristic of the surgical knot is that an extra turn is added to the initial winding of the flat knot. However, if another turn is added during the second winding, not only will the rope's endurance be increased, but the knot will also become more neat and beautiful.
Method:
1. Cross-wrap the two rope ends twice;
2. Tie a knot at the top like a flat knot; pay special attention Do not wind in the wrong direction;
3. Tighten the knot;
4. The knot in the second step can be wound one more time, so that the knot will become neat and beautiful;
5. Complete.
Thirty. Half-buckle knot
The purpose of the half-buckle knot is to tie the rope set to other items, but it is not suitable for tying square and angular items. Used on cylindrical items. However, since the half-buckle knot has very low endurance and will fall apart with a slight pull, it is rarely used alone. The role of the half-button knot is to serve as the basic knot for many complex knots. In addition, it can be added to the end of other knots to make the entire knot stronger.
Method:
1. Put the rope on the cylinder;
2. Wrap the rope end around the rope;
3. Pass the rope head in the direction of the arrow and tighten.
31. Double Half Knot
Although the half knot itself cannot withstand external force, the combined power of the two half knots is amazing; that is, the double half knot Knot. Even when the rope is stretched to its extreme, the double half knot will not come loose and can be easily undone. When using ropes to tie items, the double half knot is the best choice among all knots for its simplicity and reliability. It has a wide range of applications, and is especially powerful in outdoor activities such as camping. However, the double half knot seems easy, but once you try to tie it, you often cannot succeed immediately; this is probably the only disadvantage of the double half knot! As for the double half knot, its shape is roughly similar to the double bar knot on the following page.
Method:
1. Tie a half-knot;
2. Then go around the main rope and tie another half-knot at the end;
3. Tighten the knot to complete;
4. Complete.
32. Tie a wooden knot
After tying a half-button knot, wrap the remaining rope end around the rope loop two or three times to tie a wooden knot; It is also called the woodcutter's knot or the countryman's knot. In addition, in Japan, people call the wooden knot a standing knot; its function is just like the name, and it is suitable for setting up a tent, tying a hammock to a tree or tying a rope for drying things. The advantage of tying a wooden knot is that it is simple and strong. Even if you pull hard, you don't have to worry about the knot falling apart; but having said that, tying a wooden knot is not a perfect knot, so when it comes to items that need to consider safety, tying a wooden knot Knots are not a good choice. When using a wooden knot, you can add a half-knot after completion to strengthen the protection, which is suitable for carrying slender objects.
Method:
1. First tie a half-knot;
2. As shown in the circle, wrap the remaining rope ends around the rope loop Tighten after two or three turns.
Thirty-three. Hook knot
The hook knot is the most suitable knot when you want to tie the rope of a tent or shelter to a wooden peg. The hook knot is also one of the variations of the half-button knot. Its characteristic is that the length of the rope can be adjusted by moving the knot. In addition, it is not only easy to complete and disassemble, but also the knot is very strong.
In addition to tents and awnings, the hook knot is very useful when you want to keep the rope in an extremely tight state. Since the emergence of new tents such as retractable tents, the hook knot seems to have been less used; however, just in case, you still need to learn how to tie it.
Method:
1. Tie a half-button knot first;
2. Tie another half-button knot a little away from the half-button knot;
3. Wrap the rope head back in a circle;
4. Finally tie a half-knot to secure it;
5. Tighten the knot and finish , the length can be adjusted with two knots A and B;
6. When adjustment is difficult, you can omit the half-knot in part B, and it is okay to adjust only part A.
Thirty-four. Double knots
Introduction: used as the beginning and end of other knots.
Usage: Usually used on items with equal force on both ends, suitable for horizontal pulling force.
Features: It has extremely high safety. However, if force is applied only on one end of the rope, the knot of the double tack may become messed up or loosened.
Method:
Method ①: A commonly used method of winding the rope around an object.
1. Wrap the rope around the object once;
2. Wrap it around again from above;
3. Tighten both ends of the rope; < /p>
4. Finally, just tie a half-knot. Even if you pull the rope hard in the direction of the arrow, you don’t have to worry about the knot unraveling.
Method ②: Make two rope loops, overlap them and put them on the object to complete the double knot. This method is very quick and convenient when you want to wrap the rope loop around an object, and you can start tying the knot from the middle part of the rope.
1. Make two rope loops;
2. Overlap the right rope loop on the left rope loop;
3. Directly insert into the object Up;
4. Completed.
Method ③: When the object is in a horizontal position, or when force is exerted from below, this method can be used to complete the knot. If only one party bears the load, it is safer to add a half-knot.
When climbing a snow mountain, in order to prevent slipping and falling, when climbing in groups, if there are three people in a group, I am used to using such knots for the middle person.
35. Double double tack knot
In order to make the knot stronger, the method of tying the double tack knot and then tying it again is a double double tack knot; usually used When the rope must be tied to an object for a long period of time. The most commonly used method is the first method. If you need to set a rope loop, you can use the second method.
Method 1:
Method 2:
Thirty-six. Three tack knots
Introduction: The function is the same as the double tack knot. But more solid.
Purpose: Apply drag force in the vertical direction.
Method:
The purpose of the triple tack knot is to tie the rope to the object reliably. Its characteristic is that the rope goes around one more time during the double tack knot. When both ends of the rope are tightened in opposite directions at the same time, it becomes very strong.
Thirty-seven. Grab knot (Prussian knot)
The biggest feature is that it is easy to knot. When using it, you should pay attention to keeping the load balanced at both ends of the rope. It can be used to hang objects and can also be used with other things. Knots are used for binding and other work. In addition, grab knots are also the basis for knitting knots. Weaving floor stalls, hanging baskets, handbags, etc. are all inseparable from grab knots.
Method:
It has the effect of effectively stopping under sudden force.
38. Water knot
It is a simple and strong knot used to connect two ropes of the same thickness. Known in the climbing world as loop tying, a sling can be made by joining the two ends of a rope in this way. This knot is mainly suitable for connecting flat straps. The method of tying is very simple. After tying a single knot at the front end of a rope, the other rope can pass through the circle of the previous rope against the knot shape. Although the knot can be tied into a small and beautiful shape, be aware that it will sometimes loosen, so be sure to leave four to five centimeters of length at the end of the rope and tie the knot firmly.
Method:
1. Tie a single knot at the end of a rope, leaving sufficient length at the end;
2. Tie the other The rope starts from the end of the previous rope and goes through the knot in the opposite direction;
3. After the rope is passed;
4. After leaving a certain length at the end of the two ropes, tie it hard into a knot.
Thirty-nine. Double loop knot
Can be used with hooks.
Method:
Forty. Mixed knots
Used to connect ropes of different diameters.
Method:
Forty-one. Interlaced knot
Also known as fisherman's knot, sailor's knot, tight knot, and silkworm's knot. Used to connect ropes of the same diameter.
Method:
42. Lever Knot
The lever knot is a knot used to tie the rope to the attachment. It is similar to the double half knot, It is the same as knots such as wooden knots, which can be used to connect ropes between trees or when setting up tents and tying tent ropes.
In addition, when the rope is easy to slip or the rope head is too short and it is difficult to use force, the lever knot can be used as a handle by tying a knot on the rope; usually a stick handle is added after the knot is completed. The disadvantage of the lever knot is that there is a risk that it will come loose if the knot is not tightened hard enough. However, because it is very easy to tie and disassemble, even with some minor shortcomings, its range of uses is still quite wide, making it an indispensable knot for camping activities.
Method 1: Put the rope directly on the pillar.
1. After rolling the rope around the pole, wrap the rope end around the rope;
2. Twist the rope loop to make a small rope loop;
3. Pass the rope end through the rope loop and tighten the knot.
Method 2: Make a handle on the rope.
1. As shown in the picture, tie a knot on the rope;
2. Insert the rod-shaped object and tighten it.
Forty-three. Back hitch
The back hitch is well-known for using the middle part of the rope as a loop. It was originally a prop used to tame wild horses. When using ropes to pull heavy objects, people often use this knot to make several rope loops, and then put the rope loops on their wrists or shoulders for work; therefore, the back knot is also called a human knot. In addition, in ancient times, when the army moved and towed cannons, they also used the back tie to achieve the purpose, so it is also called the artillery knot. However, the above-mentioned uses have gradually disappeared in recent years. Nowadays, its function is to use ropes to hoist small things during camping activities. Although it is a very simple knot, if it is used or loaded too much, the knot will loosen and the loop will become larger.
Method:
1. Make a loop in the middle part of the rope, and then pull part A downward;
2. Make the rope look like this The shape is as shown in the picture. This shape is exactly the shape shown in the previous lever knot method 2. Then pull out part B in the direction of the arrow;
3. Pull it out to shape;
4. Tighten it to complete the back tie.
Forty-four. The middle knot
It is the same as the back knot, which is a knot with a loop in the middle of the rope; however, in terms of firmness and safety, the middle knot They are all better than back ties and there is almost no need to worry about loosening. In addition, being easy to untie is also one of its features. As the name suggests, the middle knot is often used to tie the person in the middle when climbing. In this case, just make a big rope loop and wrap it around the middle person. At the same time, you can also use the middle knot on a rope to make several small rope loops, which can be used to hang things such as lanterns. It has a wide range of uses.
Method:
Method ①:
1. Use the middle part of the rope to make a figure-eight-shaped rope loop, and then pull part A upward so that It becomes the shape shown in Figure 2;
2. Then pull out part A through the head direction;
3. Tightening is completed.
Method 2: Although the shape of the knot is a little different, it can still be regarded as a kind of middle knot.
1. After folding the middle part of the rope, pull the folded part upward;
2. As shown in the picture, let the two rope loops cross;
3. Tightening is completed.
45. Shortening Knot
Purpose: To shorten a long rope to avoid cutting it because it is too long. This method can also be used to strengthen the protection of parts of the rope that are prone to wear. .
Features: If the rope is too loose, the knot will easily loosen and lose its function.
Method ①: Fold the rope in half twice, and then secure it with half-knots at both ends.
Method 2: Make three side-by-side rope loops, pass the middle rope loop through the left and right loops and pull out.
Methods for reinforcing shortened knots: When reinforcing, use double knots as shown in the picture or insert rod-shaped objects into the left and right rope loops.
Forty-six. Chair knot
The main purpose is to lift the sick and wounded from high places to the ground. This knot is tied around the body of the rope, and the two ends of the rope are controlled by people at height and on the ground respectively.
Method:
Forty-seven. Ring within a ring
Can be used to support or pull out people in crevices or other places where it is difficult to climb out. When making, the rope needs to be doubled, and the two loops are neither too tight nor squeezed. Use one to wrap around your hips and the other around your upper body, like a work hang board.
Method:
1. Bend the double rope into a loop and pass the live end through the loop.
2. Turn the free end downward (a), then put it through the double-layer ring (b), gently move it to the back of the fixed part (c), and pull the large double-layer ring to tighten it (d).
Like the triple single ring, you need to practice before using it. You will find many uses for rings within rings. When decorating a house or boat, use this ring at each end to support a suspended platform. If there are wooden poles at each corner of the platform, grooves can be made on the wooden poles to prevent the rope from slipping.
48. Climbing Knot
This knot has a non-sliding loop and can be made in the middle of the rope, but cannot be used at the end of the rope. Several climbing knots can be made on a rope to cover the human body, which can be pulled or lifted. When climbing, it is very convenient to carry a rope with a climbing knot. You can put your hands and feet on the rope to support your body. When you feel tired, you can rest on it for a while.
Method:
1. Cross the rope;
2. Fold the rope into a loop;
3. Twist it into a loop Small loop;
4. Thread the small loop through the original loop;
5. Pull gently to secure the knot, and tighten carefully.
Note: If you accidentally make a mistake when tightening the knot, it can become a slip ring. If the loop is not twisted the way shown in Figure 3, you may find other ways to make this knot. The strength of the ring is not affected by how it is twisted, or whether the twist changes.
Forty-nine. Rope Ladder
Tie some climbing knots on a rope, the specific number depends on the need, and then you can make a simple rope ladder. Rungs can also be used. Strong sticks or the wreckage of airplanes or vehicles can be used as rungs.
Method:
Use two ropes, or use a longer rope in double strands. The distance between the climbing knots should be equal on both sides of the rope. To make a rope ladder, thread the sticks through the corresponding rings. When making a climbing knot, attention should be paid to tightening the loops on the sticks, and the distance between the sticks on the rope ladder should be reasonable. To be on the safe side, test each knot for firmness before use.
Fifty. Lasso
This is another kind of lasso knot that can slide freely, but this knot has an obvious circular ring, which is suitable for throwing and lassoing. thing, so it’s a set