How to match the throttle of 07 Odyssey cable

07 Odyssey cable throttle matching can be operated according to the following steps:

1. Turn the ignition switch to on after the flameout.

2. Press the accelerator quickly after about 3 seconds, and make sure to release the accelerator pedal 5 times within 5 seconds.

Don't move anything, wait for about 7 seconds, and then step on the accelerator.

4. After continuously pressing the accelerator pedal for about 10 seconds, the engine fault light on the clock will flash and then remain on. At this point, the throttle matching has been completed.