10 yinglang gt how to reset the cleaning throttle?

First, remove the throttle from the engine compartment, and the position of the throttle can be found along the air filter pipeline. The standard way to clean the throttle is to remove the throttle, pull the throttle to full open by hand, spray the throttle cleaner on cotton cloth, and wipe the dirty part of the throttle until it is clean.

In the process of cleaning the throttle, Buick Hideo gt first takes the throttle out of the engine compartment, and the position of the throttle can be found along the air cleaner pipeline. The standard way to clean the throttle is to remove the throttle, pull the throttle to full open by hand, spray the throttle cleaner on cotton cloth, and wipe the dirty part of the throttle until it is clean. Then match when reinstalling the throttle: throttle matching is completely divided into two steps, first fully open and then fully closed, and it is completed once in the following way, without any other operation in the middle.

First, initialize the maximum throttle opening: turn the key to the second gear, that is, all warning lights are on, but the gear is not on yet, and keep it at 15-20 seconds; Step on the accelerator to the bottom and keep the maximum throttle opening 15-20 seconds; Turn off the key, pull out the key and wait for 20-30 seconds.

Then initialize the minimum throttle opening: turn the key to the second gear, that is, all warning lights are on, but the gear is not on yet, and keep it at 15-20 seconds; Turn off the key, pull out the key and wait for 20-30 seconds.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)