How to disassemble Bora heater?

Pacific auto network 1. First, turn off the power supply to ensure that there is no electricity to run. Secondly, remove the lampshade and check the internal situation. There are two lamps in it, so use one of them. 2. Unscrew the fixing screws of the mirrors and take down one of the mirrors to control the strength. Don't slip off your hands or all the screws, you need to take good care of them.

Bora classic heater is more troublesome to disassemble. First remove the steering wheel, then remove the four fixing screws of the steering column, then remove all fixing screws of the instrument panel, and also remove the instrument panel.

Before cleaning the heater, you must first find the location of the air conditioner filter. The position of air-conditioning filter of each model is different, some are under the front windshield, and most of the air-conditioning filters are located in the glove box. You need to remove the air conditioner filter first. First, open the glove box, squeeze the plastic on both sides of the glove box, and easily take out the glove box.

After the glove box is removed, you can see the air conditioning filter element, which is supported by the plastic bracket. Loosen the two buckles to pull out the air conditioner filter and its bracket. The air-conditioning filter element taken out needs to be blown off with an air gun. If it is too dirty, it is recommended to replace it directly. The price of air-conditioning filter elements is basically tens of yuan. It is suggested that car owners choose air conditioning filter with activated carbon, but its price is only higher than that without activated carbon.

After blowing off the dust, it is necessary to spray bacteriostatic agent on both sides of the air conditioning filter element, then put it in a clean place, clean the internal and external circulation, and then put it back into the air conditioning filter element.