How to use 3D printing borders

: Cut the packaging tape of the 3D printer, open the carton, take out the random accessories and wearing parts on the carton, and lift the machine out of the carton.

2: Remove the conduit from the machine, remove the fixing device on the optical axis, insert the power cord, and turn on the red power switch.

3: Main menu settings platform reset.

4: Place the fixing piece under the platform and remove it.

5: Insert the material conduit into the eight-shaped ring of the spool, install the material conduit on the feeding device on the back of the machine, and install the other end on the nozzle.

6: The glass plate is placed on the platform and clamped with long tails.

7: Install the pendant to the rear of the machine and tighten the pendant with fastening screws. After loading the material into the hopper, use scissors to cut off the material threads obliquely, straighten the material by hand, and place the material into the feeder.

8: Turn on the power of the printer, enter the menu, select heating, and after heating is completed, select feed 500mm.

9: When the filament is close to the nozzle, select the wire feeding command for extrusion.

10: After the nozzle spits out evenly, insert the SD card, select the printing interface, and then select the file to be printed. The platform begins to rise. At this point, the operation is over, and just wait for printing.