Elantra generator generates electricity 14 or more, and abs airbag light is on when stepping on the accelerator.

The airbag indicator lamp indicates the condition of the system to the driver. The indicator light is controlled by the airbag system control module (ACM), which is usually called the airbag control computer. When the ignition key is ignited, the ACM module receives the ignition and start signals. When the ignitiON switch is turned on (turned to the ON position), the airbag indicator light should flash for 7 ~ 9 times, and then keep a steady light emission during the engine start. Once the engine is started, the airbag indicator lights up 7 ~ 9 times, and then remains off during the engine operation.

Any of the following indicators indicates that the airbag system is faulty:

1) If the ignition switch is turned on, the light will stay on without flashing.

2) If the ignition switch is turned on, the light flashes for 7 ~ 9 times and then continues to light up.

3) If the light is on when the engine is running.

4) If the light stays off.

5) If the light cannot shine stably during the engine start.

If any of the above conditions occur, the driver should check the airbag system, because the airbag system may not work. When the airbag system enters the diagnostic mode, the indicator will flash the fault code. It should be noted that some airbag systems continue to emit light for about 5 seconds after the ignition switch is turned on and the engine is started. .