19 sagitar accelerator pedal vibration?

Pacific auto network 1. Is the air filter too dirty, which leads to insufficient air intake and needs to be replaced? 2. The gap between the ignition head of the spark plug is too large, which leads to electric jump and needs to be replaced. 3. The fuel nozzle is blocked and needs cleaning. 4. Replace the gasoline filter. If the oil filter is too dirty, it will lead to insufficient oil supply. 5. Check whether the oil is dirty, which affects the lubrication effect of the engine and leads to excessive running resistance.

This fault is generally caused by excessive engine jitter and transmitted to the accelerator pedal. Possible failure points are as follows:

It may be that one or more cylinders do not work due to the engine cylinder failure, so the engine jitter is transmitted to the accelerator pedal.

Common failure points of cylinder lack are: spark plug failure, ignition module failure, poor gasoline quality and so on. It may be that the throttle of the engine is too dirty, causing the engine to shake. It is recommended to check the throttle.

If it is too dirty, you need to clean the throttle. It may be that the rubber parts inside the engine and gearbox bracket are aging, so this part cannot absorb the vibration when the engine is working, so the vibration will be transmitted to the accelerator pedal.

Cleaning and replacement of transmission oil circuit. If the transmission oil is not changed for a long time, the transmission may not work smoothly and the tire system will be affected. Such as a rim or tire bulge. Check the four-wheel alignment and dynamic balance. If there is no problem, check whether the rim is hard.