125 can motorcycles be equipped with turbochargers? How to install it? What are the functions after installation?

Theoretically, any internal combustion engine can be equipped with a turbocharger. Generally speaking, motorcycles will not be equipped with turbochargers, because ordinary engines can't bear too much supercharged value. If the supercharged value is too small, it is meaningless to install turbines.

Installation steps:

1. Open the hood and find the power unit. Separate the wires.

2. Connect the turbocharger according to the corresponding wires. Pay attention to ensure the lubrication of turbocharger.

3. When prewetting the turbocharger, be careful not to immerse the lubricating oil in the turbocharger.

Function after installation: The turbocharger relies on the exhaust gas discharged from the engine exhaust passage to drive the blades of the turbocharger to rotate, thus driving the blades on the other side of the engine intake passage to rotate, increasing the air intake of the engine, thus improving the air intake efficiency and greatly improving the torque and power generated by the operation of each cylinder.

Extended data:

Turbocharger is actually an air compressor, which increases the air intake by compressing air. It uses the inertia impulse of the exhaust gas discharged by the engine to push the turbine in the turbine chamber, and the turbine drives the coaxial impeller, which pressurizes the air sent by the air cleaner pipeline and sends it to the cylinder.

When the engine speed increases, the exhaust gas discharge speed increases synchronously with the turbine speed, and the impeller compresses more air into the cylinder. With the increase of air pressure and density, more fuel can be burned, and the output power of the engine can be increased by increasing the fuel quantity and adjusting the engine speed accordingly.

References:

Baidu encyclopedia-turbo charging