How to install water tank guards in mazda 6

The installation method of the water tank guard plate is to align the empty position of the guard plate with the empty position below the water tank and tighten the screws. Vehicle radiator generally refers to the water tank, the water inlet of the water tank is at the upper part of the water tank, and the drain valve is at the bottom of the water tank; There is antifreeze in it, and tap water can be added under special circumstances.

develop

The maintenance method of automobile water tank is as follows:

1. Stop the car and turn off the engine. When the coolant temperature drops, open the expansion kettle and fill it with water tank cleaner.

2. Start the engine until the cooling fan works, and then idle for 5- 10 minutes;

3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed, and then slowly disassemble from both ends to the middle, and never break the fixing buckle;

4. Ensure that the coolant temperature is completely cooled, then discharge the tank cleaner together with the coolant, and finally replace it with a new engine coolant.