Can Cool Supreme Rubik's Cube RC- 120A chassis use Cool Supreme Poseidon 120V water-cooled radiator?

E3v3 \ msiz87i game itx \ msin780gaming \ 8g1.35v narrow strip.

Water cooling scheme:

There is a fan installation position of 12CM in the middle of the chassis, which can be used to install the cold row. The fan blows towards the front panel, and the hard disk is recommended to be installed in the top slot. If there are multiple hard disks, it is recommended to install them in the CD-ROM drive. Consider adding a removable hard disk box. The cold row can consider two fans, with the cold row sandwiched in the middle, and both fans are set to blow toward the front panel. The key is that the front fan must transfer the wind from the cold exhaust to the front exhaust. Because there is an 8CM exhaust fan on the side of the chassis, the heat dissipation of the whole machine is basically side suction in the front row. Because of the use of water cooling, the water cooling head is very low, and the side suction fan can directly blow to the graphics card backplane, so there is also a lot of room for power supply to the water cooling head, which is convenient for the cold-exclusive fan to inhale.

It has not been tested specifically, but it is more effective than changing the mute fan. I spent 500 yuan to replace all four fans with top owl fans, and I regret it. I might as well use the above water cooling scheme.