Ceramic tile punching method

Perforation of tiles is a common operation in home decoration, but many people don't know how to do it. This paper will introduce the method of punching holes in ceramic tiles to help you better complete home improvement.

Prepare tools

Go to the hardware tools market, there are special drills for drilling ceramic tiles and cement, and there are also drills for drilling glass (8mm), all of which can be used. It is recommended to buy more drills, which are very cheap.

find

Before you punch your eyes, you must first find out what is behind the wall and whether there are water pipes and wires. If not, you are not afraid. Measure the horizontal line, determine the position of the hanger, and accurately mark the strokes with black marks. Find a nail and gently tap a mark on the marked place with a hammer. Tap the surface of the tile a little bit, so that it will not deviate when drilling.

Matters needing attention

Before you punch your eyes, you must first find out what is behind the wall and whether there are water pipes and wires. If not, you are not afraid. When drilling, keep the drill perpendicular to the wall. When drilling tiles, you will find it easy. When it comes to cement, it's slow. Don't worry, it's over without reinforcement, hehe.

fixed

After drilling, insert a screw and see how deep it is. Make sure that your plastic wedge or expansion tube can be put in. The part of the expansion pipe exposed from the wall surface is cut, tightened and trimmed with a blade.