The weather in Manila cannot be updated in 2D. What happened? My mobile phone is Viva T2223.
1. Weather software has network selection. Let's do another experiment.
2. Upload and download online journals with ucweb to see if they can go online.
share
-
Additional internet settings
★ dopod S 1 uses WIFI, GPRS, Bluetooth, synchronization and other internet access methods to set up Daquan.
We can surf the Internet through S 1 mobile phone, which can be roughly divided into two ways, one is the dial-up access mode of GPRS, and the other is the direct access mode of net. The main difference between the two is that one needs to dial and the other does not. For example, if a mobile phone enjoys computer broadband access via WiFi or * * *, it belongs to the non-dialing mode of direct access to the Internet. However, GPRS cmnet. In fact, the reason is very simple. As long as you explain, everyone should understand that, first of all, the access mode of net is a kind of internet access mode without any restrictions, while the mobile phone will be restricted by certain mobility when accessing through cmwap of GPRS, while it will not be restricted when accessing through cmnet. It is precisely because of this difference between restricted and unrestricted access that the GPRS internet access charges of cmwap and cmnet are different.
The hidden content of this post needs to be replied before browsing.
1 and GPRS can be dialed in two ways: cmwap and cmnet.
2. Non-dial-up ways to directly connect to the Internet are also divided into: WiFi and mobile phone synchronization (PC)*** Non-dial-up ways to enjoy computer networks.
3. Visit to. Net also includes the access mode of cmnet, because this access mode is also directly connected to the Internet and is not restricted by movement.
4.c mwap is the GPRS dialing mode of Monternet, which can only browse the wap page of mobile phone or access the services provided by Monternet gateway through wap proxy. This model has some limitations. I believe you will have a clear concept of future network settings.
First, only use WIFI to surf the Internet (or synchronize computer broadband access)-this method is completely recommended.
What needs to be pointed out in particular is that surfing the Internet here only refers to using the Wi-Fi function of S 1, excluding GPRS surfing the Internet and enjoying surfing the Internet with a PC.
1. install and download the Wi-Fi patch. The first thing to note is that domestic licensed products do not come with Wi-Fi. Even installing a similar patch will not help. Parallel imports all take wi-fi. Some machines have the Wi-Fi logo when they are turned on, but some machines can only use this function if they are equipped with a Wi-Fi patch. Therefore,. Any WLAN icon displayed on the screen indicates that the mobile phone can use Wi-Fi. See figure 1.
1.jpg (47.8 KB)
2008- 1-25 17:30
Figure 1
2. Download and install the UCWEB browser. Some people may ask, since the mobile phone comes with the default IE browser, why install another browser? UCWEB browser has many outstanding advantages: opening web pages quickly and many additional functions. Very well received by machine friends. UCWEB browser can be installed on the memory card, and its shortcut can be displayed on the desktop, which is convenient for surfing the Internet. I set it like this: Start ~ Settings ~ Today ~ Projects ~ Tick in front of UCWEB.
3. Network settings. Start ~ Settings ~ Connect ~ Connect ~ Advanced ~ Select a network. There are two options on the network management page: ① When the program automatically connects to the Internet, use:-Note that you don't need to click Edit … and Create …, just select Internet settings from the drop-down menu; ② When the program is automatically connected to the private network, use:-Similarly, you don't need to click Edit … and New …, just select company settings from the drop-down menu. Then click "OK" in the upper right corner to exit. See figure 2.
2. jpg (51.11kilobytes)
2008- 1-25 17:30
Figure ii
4.UCWEB browser settings. Open the UCWEB browser, and the "System Settings" page will appear in the menu ~ Settings ~ System. Make the following settings: In "Network Settings", you can choose "Company Settings" and "Internet Settings", but you must never choose "Automatic Adaptation". In "Networking Settings", be sure to select "Direct Networking", and other options need not be changed, just keep the default state. Then click × in the upper right corner to exit. See figure 3.
3.jpg(75.0 1 kilobyte)
2008- 1-25 17:30
Figure 3
5. Turn on the wireless network. Return to the interface in Figure 1 and click the WLAN icon to make it blue. And be sure to close the "data connection" and don't let it turn blue.
6 Set the Wi-Fi function. When there is a Wi-Fi module in the machine (including after patching), you can see the Wi-Fi icon at Start ~ Settings ~ Connect ~. See figure 4. Open this icon, and the system will automatically find the hotspots of your wireless router at home or at work, and then set them in the order of prompts. If your router is encrypted, you will be prompted for a password. After the first entry is successful, you don't need to enter it again.
4.jpg(62.65 KB)
2008- 1-25 17:30
Figure 4
7. Click the UCWEB shortcut icon on the screen. If there is no shortcut icon, you can go to the resource manager to find the corresponding program to open. In this way, you can browse the web. As shown in fig. 5.
5.jpg(72.52 KB)
2008- 1-25 17:30
Figure 5
Second, the wap access mode is suitable for users who use GPRS to access the Internet on a monthly basis (this mode is recommended if they want to use GPRS to access the Internet).
After selecting wap, click Edit.
1, Universal: wap This is the name of the network connection, and you can choose it at will. If you think it needs to be explained more clearly, change it to cmwap.
Well, it's like a person's name, just a name code.
1.jpg (36.3 KB)
2008- 1-25 17:47
2. Modem:
2.jpg(46.99 KB)
2008- 1-25 17:47
If, after going in, you find that there is no such connection name (GPRS), you can create a new one. This is a key step, which is related to the dialing mode of GPRS. Click Edit or New, or enter any name. For example, the name of the mobile version is "GPRS", so there is no need to change it. Directly enter the access point name, which is the most critical step.
3.jpg(54.3 1 kilobyte)
2008- 1-25 17:47
Then, the next step, all the way, is empty. If you don't fill it in, you can do it.
3.VPN is empty or ignored.
4. Proxy server settings: wap proxy is mainly set here. To put it simply, through the gateway provided by Monternet, we can access the www website through wap proxy, but this is mainly to provide proxy settings for Internet access by IE browser, and others are like UCWEB.
Browser, etc. , access the Internet through your own proxy server, so you don't need this setting. We will discuss this later. Synchronize Internet access by setting ports. I want to introduce you to the latter way of surfing the Internet.
Environment: XP, ActiveSync4.5, Bluetooth adapter, Bluetooth V3.2.2.85m cracked version.
1. Open ActiveSync, connect to any of the following ports, select com6, select all other check boxes and confirm.
2, open the phone Bluetooth (visual choice)
3. Open BlueSoleil and search pair.
4. On the mobile phone side, Start-Setup-Connection-Communication Management-Setup-Bluetooth -com Port-New Sending Port-Select pc Name-Port com6, and select Secure Connection-Finish.
5. On the mobile phone side, start-Settings-Connection-Communication Management-Settings-Bluetooth-Device-Add a new device-Select the service to be used from the device-select activesync to save.
6. On the mobile phone side, Start-Programs -ActiveSync- Menu-Bluetooth Connection. After the port connection is successful, a dial icon will appear in the taskbar in the lower right corner today.
7. You can surf the Internet through internet explorer now. If some of your programs default to wap and cmnet, please change the network settings to company settings in connection management.
Applied articles
Ok, now that wap, company settings and internet settings are available, we can determine the mobile phone network according to the actual situation of the mobile phone network. Now, we will briefly explain several typical cases in practical application.
1. Edit the network connection of the mobile phone, and start = = "Settings = =" Connection = = "Connection = =" Advanced = = "Select a network:
Select the first "Use when the program automatically connects to the Internet" as: unit setting.
Select the second one, "Used when the program automatically connects to the private network", as wap,
The purpose of this setting is to give priority to the network access mode. As I said just now, the company settings are specifically set for WiFi and broadband connections. Therefore, when Internet access software such as IE is used to connect to WiFi or broadband, the mobile phone will automatically connect to the network through company settings, and will automatically switch to the cmwap access mode of GPRS without WiFi or * * * computers. That is to say, through this setting, as long as WiFi or mobile phone is synchronized with the computer, it will give priority to setting up internet access for the unit, except for a few softwares such as GPRS and UCWEB.
2. Edit the network connection of the mobile phone, and start = = "Settings = =" Connection = = "Connection = =" Advanced = = "Select a network:
Select the first "Use when the program automatically connects to the Internet" as: unit setting.
Select the second one, "Use when the program automatically connects to the private network" as the unit setting.
Obviously, the setting of this method is to turn off the GPRS Internet access mode, and the mobile phone can only access the Internet through WiFi or * * * *. Mobile phones don't have monthly GPRS, so it's safer to use this connection method, and you won't worry about connecting GPRS, except UCWEB browser.
3. Edit the network connection of the mobile phone, and start = = "Settings = =" Connection = = "Connection = =" Advanced = = "Select a network:
Select the first "Use when the program automatically connects to the Internet" as: wap.
Select the second one, "Used when the program automatically connects to the private network", as wap.
This way of surfing the Internet is just the opposite of the above, that is to say, mobile phones can only use GPRS wap to access the Internet, and at the same time block WiFi or * * * access to computer broadband networking (the choice of most people).
4. I won't explain the Internet settings here. After all, this tariff is not applicable to most people at present. If your mobile phone is wap or cmnet, just choose.