How to install the warm air tank in changan cs35

1. Place and fix the warm water tank. 2. Install the heater water supply pipe behind the cylinder head. 3. Arrange the vacuum pipes and light wires behind the heater control device. 4. Tighten the screw of the post. 5. Install the control panel. 6. Fill the cooling system with coolant.

Automobile water tank, also known as radiator, is the main component of automobile cooling system. The function is to dissipate heat. The cooling water absorbs the heat in the water jacket. After flowing to the radiator, the heat dissipates and then returns to the water jacket to adjust the temperature. It is an integral part of the automobile engine.

the car heating system heats the air flow inside or outside the car, and blows the heated air flow into the car again through the pipeline, thus forming warm air. Common automobile heating systems can be divided into three types: coolant heating, gas heating and exhaust gas heating. Coolant heating is used in automobiles. It consists of coolant, water pump, water valve, blower, warm water tank (heater core) and other parts. The coolant is heated by the engine. After being pressurized by the water pump, the hot water enters the warm water tank from the water inlet of the warm water pipe through the rotary water valve which controls the coolant flow. The coolant entering the warm water tank enters the engine from the outlet of the warm water pipe and circulates.

when the heater box (heater core) is heated by the coolant, the blower is also working. The blower sucks in the cold air inside or outside the car, and then blows it to the heater box. Cold air is heated by the warm air box and blown into the car, thus increasing the temperature inside the car.

million car purchase subsidy