Where is the decoding socket of Ford Jiangling transit computer?

The socket of Jiangling Transit decoder is located in the fuse box on the left side of the driver's seat. You need to remove the spare six fuses before you can see the socket. For the obstacle code and troubleshooting of Jiangling Transit, we strongly recommend that it be handled by professional technicians to avoid permanent damage to the driving computer motherboard due to improper operation. The following is an introduction about OBD: real-time monitoring of 1 OBD includes EGR, engine, particulate trap, catalytic converter, oxygen sensor, emission control system, fuel system and other systems and components. Real-time monitoring includes intake manifold pressure, intake temperature, air flow, throttle position, oxygen sensor voltage, fuel pressure and other data. 2.2. Original design intent. OBD is to monitor whether the automobile exhaust emission reaches the standard in real time through the running condition of the engine. The main function is to monitor the status of emission-related components and transmit the data to the driving computer to judge whether the vehicle is running normally. 3.OBD system will always monitor the running state of the engine to judge whether the automobile exhaust exceeds the standard. Once the standard is detected, the system will immediately issue a warning. When the OBD system fails, the failure light or warning light used to detect the engine will flash. At the same time, the powertrain adjustment module (PCM) will store the fault information in the memory, and in some programs, the fault code can be read from PCM. With the help of fault code, maintenance personnel can quickly and accurately determine the nature and location of the problem.