How to disassemble Roewe 750 intake manifold 2.5v6?

Roewe 750 intake manifold disassembly steps are as follows:

1, turn off the ignition switch and all electrical appliances.

2. Disconnect the negative terminal of the battery.

3. Remove the manual maintenance switch.

4. Remove the electronic throttle body.

5. Remove the intake air temperature and pressure sensor.

6. Loosen the clamp, unscrew the fixing bolt of the crankcase ventilation pipe bracket, and remove the crankcase ventilation pipe.

7. Loosen the clamp and disconnect the ventilation pipe of PCV valve from the upper assembly of intake manifold. Unscrew the fixing bolts of the intake manifold support plate.

8. Loosen the clamp and disconnect the outlet hose of the carbon canister control valve from the upper assembly of the intake manifold.

9. Unscrew the bolt of the carbon canister control valve bracket, and remove the carbon canister control valve bracket and the carbon canister outlet hose.

10. Unscrew the fixing bolts of the upper intake manifold assembly and take out the intake manifold assembly.

As the first mass-produced mid-to-high-end car product with pure British car design and technology genes in China, Roewe 750 inherits the British aristocratic temperament. Roewe 750' s classic and extraordinary appearance comes from British royal blood, elegant and noble.