Do you want to decorate the wires on the top or on the ground? Matters needing attention in purchasing decorative lines

There are many kinds of decoration wires, so you should know the purchase precautions of decoration wires in detail before decoration. Different routing methods have certain influence on the decoration effect and later use. There are two common routes: top and bottom, so which is better, the top or the ground? These are all problems that owners should know before wire decoration.

Do you want to decorate the wires on the top or on the ground?

1. Generally speaking, it is a good choice to decorate the ceiling wires: usually, the wires installed by regular decoration companies are connected from the ceiling, followed by the wall, and if there is no alternative, the wires are connected from the ground.

2. The maintenance of the top of the decorated wire is much easier than that of the ground, so the top is also considered from the maintenance aspect: mainly because the moisture on the ground is heavy, so the ground is easy to break; When our buried lines are broken, we need to dig out the tiles or floors that were originally decorated during maintenance.

3. Construction cost: In terms of materials and labor, grounding may save some materials and facilitate construction; However, considering the later maintenance and other factors, the ground is not suitable for wiring.

Matters needing attention in purchasing decorative lines

1. The domestic power cord should adopt BVV2×2.5 and BVV2× 1.5 models. BVV is the national code, which is sheath line BVV2×2.5 and BVV2× 1.5, representing 2 cores 2.5 mm2 and 2 cores 1.5 mm2 respectively. Generally, BVV2×2.5 is used as the main line and trunk line, and BVV2× 1.5 is used as the single branch line and switch line. BVV2×4 is used for one-way air conditioning special line, and special grounding wire is provided.

2. When buying wires, we should first consider whether there is a "Great Wall logo" and a production license number on the winding packaging label, and then look at whether the plastic skin on the outer layer of wires is bright in color and delicate in texture, and there should be no open flame when lit with a lighter. Informal products use recycled plastics, which are dull in color and loose in texture, and can ignite open flames.

3. Second, look at the length and price. BVV2×2.5 each roll length1005m, the market price is around 280 yuan. The length of informal products ranges from 60 meters to 80 meters. You can count the number of turns of the line and multiply it by the radius of the whole roll, and then you can roughly calculate the length. The price of such products ranges from 100 to 130 yuan. Secondly, you can ask the merchant to cut a broken head and look at the copper core material. BVV2×2.5 copper core diameter 1.784 mm, which can be measured with micrometer.

4. The regular product wire is pure copper, the outer layer is bright and slightly soft. Informal product copper is dark and hard, belonging to recycled copper, with high resistivity and poor conductivity, which will increase the temperature and be unsafe. When buying wires, you should go to professional stores such as power supply stations or factory sales departments to buy them.

Do you want to decorate the wires on the top or on the ground? Matters needing attention in purchasing decorative thread. Based on the above introduction, we can see that wires are chosen as far as possible, and there are many unsafe and inconvenient factors underground. I hope you can understand.