Where is the Ford Focus fuse box?
The Ford Focus fuse box is installed on the dashboard on the driver's side, as shown in the following figure. You can open the lid and see it.
The detailed description of the Ford Focus fuse box shows that
On the inside of each commercial insurance cover, there is a corresponding code and its text description, and the destination element is searched according to the text information. (The photo is not from this car.)
Ford Focus fuse replacement process
1. For safety, please turn off the car engine and switch power supply. If it is mechanical equipment, the key must be removed.
2. Find the corresponding parts, use a small pry bar to open the lithium battery protection plate, and the number of each part is clearly written on the inside of the back cover plate.
3. You can use the lighting effect or test pen to check the fuse basically, and then consider replacing it after confirming that it has been blown.
4. Replace the same fuse with the same rated current and the same appearance (each feature needs to be consistent with the old fuse).
5. After replacement, check whether the corresponding parts have worked, or go to a repair shop for repair as soon as possible.
Frequently asked questions about fuses
1, use the fuse with the wrong specification and model, and fire accident or explosion will occur in serious cases.
2, can't replace the fuse that exceeds the rated voltage, which is easy to overload and damage the components.
3. The blown fuse does not need to be pieced together.
4, can't use paper clips instead of the original fuse.
Ford Focus Maintenance Lamp Zero
New Ford Focus service light zero mode/process;
1. Close all Ford Focus doors and windows first.
2. Turn the starting motor to the "2" position.
At the same time, after stepping on the accelerator and brake for about 3 seconds, the dashboard will display "Service:resetinprog" and ask you to hold it for 25 seconds.
After 4.25 seconds, "Service:resetcompletede" will appear, indicating that the maintenance has reached zero, and now you can release the accelerator brake.
Zero adjustment method/process of old Ford Focus maintenance lamp;
1. Close the key door and press the 0.0 button in the lower right corner of the dashboard.
2. Open the key door. At this time, you will find that the small wrench marked on the dashboard has not flashed.
3. At this time, release the 0.0 key, press and hold the button in the lower left corner, and find that the small wrench on the dashboard has disappeared.
4. The maintenance light ends at zero.
The function of the maintenance lamp is to record the application kilometers of some key components, just like the timer in the 100 meter race, which plays a role in reminding car buyers and their car maintenance workers.
As the saying goes, "a car is maintained in seven parts and repaired in three parts." Regular maintenance of a car can increase its service life. If you really wait until it breaks down before you want to repair it, it is very likely that the money spent at that time will be several times higher than the sum of the usual maintenance, and the performance of the repaired car is likely to be difficult to achieve the previous actual effect. The key to timely maintenance is to immediately repair and replace all normal worn and damaged parts, and deal with risks and common faults in time according to the all-round inspection of motor vehicles to ensure that all parts and the performance of the whole vehicle are in normal condition. Where is the Ford Focus fuse box? Ford Focus maintenance light returns to zero @20 19.