What is the parking space size of sanitation vehicle?

There are many kinds of sanitation vehicles, such as garbage trucks, sweepers and sprinklers. Different vehicles have different sizes. For example, the sweeper is generally around1840 *1860 *1500.

Sprinklers are classified by brand: Nanjun Sprinkler, Dongfeng Waterwheel, Jiefang Waterwheel, Futian Waterwheel, Heavy Duty Truck Waterwheel and Shaanxi Automobile Waterwheel.

Garbage trucks are classified by brand: Nanjun garbage truck, Dongfeng garbage truck, Jiefang garbage truck, Futian garbage truck, heavy truck and Shaanxi Automobile garbage truck.

The nozzles are classified according to their shapes: single-bridge nozzles, double-bridge nozzles, front four and back eight nozzles, flat-headed nozzles and pointed nozzles.

Garbage trucks are classified according to their shapes: swing-arm garbage trucks, bucket-hanging self-loading and unloading garbage trucks, hook-wall garbage trucks with detachable compartments, compression garbage trucks, sealed self-unloading garbage trucks and docking garbage trucks.

Information about sanitation sprinklers

Composition: mainly composed of chassis, rust-proof tank, communicator, special self-priming spray pump, pipe network, spray outlet and working platform; It has sprinkler, water delivery, drainage and emergency fire extinguishing functions. Flushing from the front, spraying from the back and spraying from the side, the self-priming special water pump can pump and drain water, and fire-fighting joints, gravity valves, tanks with working platforms and green water spray guns are installed. The water gun can be rotated to adjust the water quantity.

Principle: The engine starts to drive the pump. At this time, the impeller rotates and negative pressure is formed at the inlet of the impeller. The gas in the suction pipeline is mixed with the liquid in the pump and enters the gas-liquid separation chamber through the extrusion chamber. Because of the different specific gravity of gas and liquid, gas and liquid are separated and discharged from the outlet pipe, and liquid sinks in the gas-liquid separation chamber and circulates for many times.

Until the gas in the suction tube is exhausted and filled with liquid, the self-priming process is completed and the pump starts normal infusion. The spraying is mainly driven by the engine, and the gearbox is driven by the power take-off installed on the gearbox to generate power to spray the liquid in the tank through the pipe network.