How to use Tiggo 5x cruise control?

Press the constant speed cruise switch on the left side of the steering wheel. When the vehicle speed reaches more than 40km/h, press the SET key, and the vehicle will cruise at the actual speed at that time, and the cruise indicator on the dashboard will always be on.

The setting button is used to set the speed value for entering constant speed cruise or active speed limit. The Resume button is used to resume cruise control and adjust the speed value. LIM button is used to turn on and off the active speed limit function. During cruising, if the active speed limit LIM key is pressed, the cruising function will exit and the cruising indicator on the instrument will go out. At this time, when the vehicle speed is more than 40km/h, release the brake pedal and press the RES key, the vehicle will accelerate until it returns to the cruising state before stepping on the brake pedal, and the cruising indicator light on the instrument will always be on.

The working principle of the Tiggo 5x cruise control system is simply that the cruise control module reads the pulse signal sent by the speed sensor and compares it with the set speed, so as to send out instructions to servo-mechanically adjust the increase or decrease of the throttle opening to keep the vehicle at the set speed all the time.