When installing xp system under win7 with peach, I said that the installation of the system has been initially completed. Please restart and continue the installation.
Before we start, I want to remind you that there are three ways to install xp under win7:
1. CD installation is the easiest (recommended by novices):
The xp-sp3 version released by 0 10 can be installed (the old version can, but don't download the new version), without modifying the bios, but it needs to be installed on the CD, whether it is the oem version or the optimized version. After the installation, go to official website to download the ahci patch file and install it, and it will be ok. After the installation is completed, it is necessary for you to repair the startup items, which will be mentioned in the fifth point of the following preparatory work.
2. Use winpe3.0 hard disk to install, without modifying the bios(winpe3.0 is bigger).
If you want to install the hard disk and don't want to change the bios, you must download a winpe3.0, which is win7 pe and integrates ahci driver, so that you can see the system disk after starting pe, and then install the system according to the following methods. After the installation is completed, you must repair the startup items. This is necessary, which will be mentioned in the fifth point of the preparatory work below. Try winpe3.0. I don't want to install an optical drive and I won't change the bios, but there seems to be no hard disk version.
3. Install 3.winpe2.0 hard disk and modify bios (the method used in this article is recommended).
If you use general winpe, you must adjust the bios, which is the method to be mentioned in this article. Please refer to the following for details. The advantage of this method is that the hard disk version of winpe2.0 (the most common one now) is easy to find, and there are many versions of tens of megabytes of files, while the version of winpe3.0 is very few, with a large volume, and the smallest one is about 170m m. This paper uses the third method to illustrate it.
& lt- pay attention to the above method, provided that the partition mentioned below is prepared before installation->
Preparatory work/about to start work
1。 First of all, I divided a 20g disk and renamed it winxp, so that it can be easily identified in the future (as for how to partition, you can use your own management tools without downloading any tools. )
2。 Download the latest xp installation version, and here we recommend the new Radish Home Windows XP sp3 notebook version 3.2(20 10.03.03) (actually, it's nothing special, but it's really friendly to have a notebook. Other versions can be downloaded, but it is best to download SP3 from 20 10).
(About Ghost xp
Theoretically, it is no problem to install xp with ghost version. You can try it first, that is, change the hard disk mode of bios to ide first, so it should not be blue screen. If the installation is successful, just follow the following steps. )
3. Then download the general PE toolbox 1.92. The download address is as follows (latest version 1.94, this is 1.92).
He started the diskless installation system. After the installation, click Install to Hard Disk, and I chose Drive C. After the restart, I will see the pe option.
4. Download windows7 Optimizer/Vistamaster/and download me directly.
For the main course, select System Settings-Startup Settings-Multi-System Selection, and then select Add. The name of "Other" type can be named windows sp3.
Here is mainly to adjust the text of the startup menu, which has nothing to do with the repair of multiple startup menus. . . . (Later discovered)
5. Download the startup menu repair tool NT6 startup menu automatic repair tool. Rar, this is the connection of funny disk, and its English name is BCDautofix.
After installing xp, you need to run this software, and the dual system menu can be repaired. If it is not fixed, it will not enter win7.
6. Download the driver required by xp in official website (use ahci driver from official website or this/HP/SATA _ Intel _ 8.9.2.1002.rar).
Except for the installation disk of xp, all of the above can be placed on a USB flash drive or a convenient place to find.
Let's talk about it.
Specific installation process:
1, the installation disk of xp can be decompressed directly after downloading, but don't decompress it to the disk with the drive letter of winxp. The target disk should be left blank, and I will decompress it on disk D. So you can start over.
2. After restarting, press f2 to enter the bios settings and adjust the hard disk mode from ahci to ide. This is because the hard disk can only be recognized when winpe is started. Otherwise winpe won't see any disks when it enters. Save and restart
3. At this point, select winpe from the startup menu. After entering, open the disk that just unzipped the windows installation disk and click atuorun directly. Please click the notebook version. If you are asked to install to this drive letter, you should read it clearly at this time. You should select the previous partition of 20g winxp disk, and then start copying files. Then it will restart. Note that this is just a copy of the file. The next step is to install it.
Remember, don't make mistakes here. . . I am not responsible for this mistake. . .
4. After restarting, I see the selection menu again. The menu here is a bit messy. Click this option when you see xp. After selection, you will continue with the next installation. It is basically installed automatically here. There is nothing to say, and the details have been forgotten. . .
5. Install xp drivers in official website, especially ahci drivers (which can also be supplemented by the driver wizard). On April 2nd, it was discovered that the ahci driver in official website had to be installed or used manually.