Use method of rock fishing rod

The use method of the rock fishing rod is as follows:

1. First, thread the fishing line from the loop at the tip of the pole to the last loop of the pole handle, then tie it to the wire cup (pay attention to opening the wire gear of the wire cup), and then start to turn the handle to take up the line, and it is enough to load the fishing line about 70-80% of the depth of the wire cup.

2. Pass the reserved fishing line through the figure-eight ring (one end of the non-pin connector), and then tie it to death with the figure-eight.

3. Hang the non-male end of the string hook on the tied eight-character ring, and pay attention to the direction of the hook.

4. Hang the prepared lead pendant under the rope hook. Generally, there will be a pin connector under the hook.

5. Use a rock fishing rod. First, raise the fishing rod above your head and throw it forward. After fishing, keep still, let the fish break free for a while, and then slowly pull the hook to prevent disconnection.

This kind of pole is also called hand-sea dual-purpose pole. It is usually used to fish rocks in the sea, and now it can also fish big freshwater fish.

When using a rock pole as a hand pole, you should pay attention to the depth of the fishing position, which should not exceed the pole itself. There are two winding methods for wire groups. Directly install space beans, floating seats, wire rings and pull out the reel line, and directly connect the ready-made fishing line group. When using sea poles, the lead base can be appropriately increased. Its tonality is different from that of hand pole and sea pole, and it is softer than sea pole, so it is not suitable for long-distance casting.