How does Ford maverick put antifreeze?

First open the liquid filling port, then open the water drain valve, drain the antifreeze (generally under the water tank), then add the antifreeze, and then tighten the water drain valve after it starts to drain out new antifreeze. When the antifreeze pot is added to the scale line, start the engine, and the antifreeze level will slowly drop until it is stable, and continue to check the scale line the next day. The first step is to give the car a comprehensive inspection to see if there are any signs of cracks and leaks in the pipeline. It's best to focus on the five-way pipe, that is, there are five interfaces connecting all parts, so we must observe it carefully, because antifreeze must flow through the five-way pipe and then be distributed to different parts of the car to play its role. The second step, mainly cleaning, is to release the previous antifreeze, clean the liquid passage with clear water, add clear water to the antifreeze replenishment tank, then inject clear water into the tank to make the clear water continuously flow through the engine cooling system, then idle for 3 to 5 minutes to make the water circulate, and the water flowing out of the water tank starts to be a little pink, and continue to inject clear water until the water flowing out is clean. Don't forget to remove the heating water pipe and clean the water in the heating water tank. Step three, we need to replace the antifreeze. In order to make antifreeze flow into the water tank quickly, after draining for about 1 hour, add new antifreeze from the water pipe of the water tank (radiator), and then add a bucket of antifreeze to the antifreeze tank until the antifreeze tank is almost full, and the car will ignite for about 10 minutes. At this time, the liquid level of the cooling system will drop, and antifreeze will be added at this time. Million car purchase subsidy