Sticking method and corner cutting skill of gypsum line

Erect a plaster line near the corner, draw two marking lines on both sides of the plaster line with a marker pen, and then measure the dimensions of both sides with a steel tape measure. When you meet a corner, you can generally stick a height of 8 cm or 6.5 cm, so that when you stick plaster lines, you can reflect the beauty of symmetry.

Cutting skill

When decorating, the plaster line is usually cut by hand or knife. When cutting the plastering line at the corner, the installation speed should be slowed down. Of course, the method of cutting gypsum line in the corner can also be very simple. The cutting of gypsum line is mainly an angle problem, which is similar to splicing angle lines with plastic gusset plates. Just make a right-angle clamp, and then put the line in the right position and cut it directly at 45 degrees. If you have a 45-degree bevel cutter, you can cut directly on the bevel cutter.

Length calculation

Gypsum lines with different lengths naturally have a set of calculation methods. Take a 7 cm plaster line as an example. Usually, the length of the bevel is 5 cm, because the width of the gypsum line multiplied by 0.7 is the length of the bevel, and the angle and surface should be inclined when sawing.