Curtain installation steps

This paper will introduce the installation steps of curtains to help readers better understand the installation methods of curtains.

Marker location

Taking the orientation under the curtain as the standard line, draw the orientation positioning line and the hole bit line. For three supports, the middle support is located in the center of the window or wall, and the two ends must be equidistant. The support at both ends is about 15-20 cm from the wall or about 5- 10cm from the end of Roman rod.

Stamping depth

When installing the Roman rod, the drilling depth should be between 3.5cm-5cm and 5 cm, of course, there should be no deviation and skew; Pay attention to stay away from wires and water pipes when drilling. After drilling, press the plastic expansion tube into the hole.

Mounting rod fixing

The bracket is fastened by self-tapping; The lifting ring is sleeved in the rod, and the lifting ring is divided into two parts, with 1 lifting ring at both ends; Press the Roman rod into the open bracket and adjust it so that the decorative heads at both ends are at the same distance from the wall.

Check slip

After the curtain is pulled, just hang one end of the hook into the hole of the lifting ring, but after hanging the curtain, open and close the curtain left and right to check whether the sliding is flexible and whether the two curtains are at the same height.