Life encyclopedia: knowledge of water basin
The reasonable width of the basin is about 430-480mm, the depth is above 180mm, and the thickness is between 0.8- 1.0mm, because it can prevent splashing and reduce the difficulty of cleaning. The height of the table top connecting the basin is about1m.
It should be noted that the height of the countertop of the washbasin affects the comfort of the washbasin, so before buying the washbasin, you should plan and choose according to the height of the countertop. In addition, consider the width of the mesa to choose the most suitable one. Personal height can also be considered, but it is best to take the average height of the whole family as the standard.
How to place the basin correctly
The so-called "eater, Lu also" means that the kitchen is the fortune of a family. When decorating the kitchen, we should consider the feng shui taboo of putting the basin. How to place the basin correctly?
1 The washbasin is used for washing vegetables and dishes, and it is often used for cooking, so it is best to put it next to the stove, and it is on the left side of the stove, because it is convenient to take water and wash vegetables, and holding water in your right hand means "getting rich".
2. Stoves and pots should be placed from north to south, because the magnetic field in the north is the best in geomantic omen, which is conducive to gathering vitality and helping families prosper. Moreover, the ideal sitting direction is to sit west facing east, that is, to place by the western wall, which can welcome the purple gas in the east and is also conducive to family fortune.
3. The most unfavorable place to put the basin is to sit east to west, because the west is in a negative position and has a negative magnetic field, which is not good for the health of users. So if you choose this position, it is best to put the five emperors' coins on the wall of the back basin, or spread a red carpet to dissolve the unfavorable magnetic field in the west.
4, the stove symbolizes fire, the basin symbolizes water, and other kitchen utensils should be placed around to avoid conflicts, because only in this way can the family business flourish.
The basin and the cooker can't hedge, because fire and water collide, which will lead to family disharmony. In addition, the cooker should not be placed too close to the basin or in the middle of the basin, because the kitchen will be "angry".
How to install the basin
Almost every family has a basin, but not everyone knows how to install it. Let's talk about the topic of basin installation!
About the installation of water basin
Pay attention to the installation of the basin, don't rush it, you need to deal with every detail step by step, otherwise it will leave "sequelae". The following are the specific steps of pool installation:
Step 1: When decorating the kitchen, reserve the position of the basin and tell the decorator the size of the basin in advance, so that the position of the basin can be set more accurately.
Step 2: First install the faucet and water inlet pipe, and the water inlet switch of the faucet should be connected with the water inlet pipe.
Step 3: Reinstall the basin and pay attention to the gap between the basin and the surrounding area to avoid water leakage caused by excessive gap.
Attention should be paid to the details of basin installation.
1, the basin should be installed in the last step, because other parts are installed first, so it is easy to leave "sequelae" when installing the basin, such as unstable installation of the faucet.
2. When installing the basin, the water must be drained first. Install without draining, the basin is easy to bubble and rust.
3, the faucet installation must be firm, pay special attention to the firmness of the joint, because the installation is not firm, there is water leakage when opening, which not only wastes water, but also affects the use.
4. After installation, wash the basin immediately and do a good job of basic cleaning. Clean the basin immediately after use in life, and don't let oil stains hang on the basin.
What if the washbasin leaks?
There are many reasons for water leakage in the basin, such as water pipe blockage, excessive gap at the joint of the basin, water leakage at the outlet, etc. According to different reasons, the treatment methods are different. Let's take a look at how to deal with the problem of water leakage in the basin!
1. The water outlet of the basin is leaking.
The damage of the axial washer of the basin will lead to water leakage at the outlet of the basin. In this case, the correct treatment is to unscrew the gland bolt with pliers, and then take out the damaged shaft gasket with a clamp and replace it with a new shaft gasket.
2. The gap under the birdbath bolt leaks.
The wear of the triangular washer in the gland will lead to water leakage in the gap below the sink bolt. If this happens, turn the faucet screw with a screwdriver, loosen the gland, then take out the triangular gasket and replace it with a new one.
3. Water leaks at the joint of the water basin nozzle.
Loosening the nut of the faucet will lead to water leakage at the nozzle joint of the basin. Just tighten the nut again or replace it with a new one.
4. The water pipe is leaking due to aging, and the seal is not in place.
The basin is used for a long time, and the water pipe is easy to age. Replacing water pipes can solve the problem of water leakage. In addition, if the water pipe seal is not in place and there are sundries in the pipe, water leakage will also occur. The correct treatment method is to remove impurities and reseal them. It should be noted that if it can't be repaired, you should find professional maintenance personnel to avoid damage and replace it all.
The sewer is blocked and leaking.
There are too many sundries in the sewer, which leads to blockage and leakage. Need to dredge the sewer and remove all the debris inside. If the sundries are hard and sticky, finally find a professional to deal with them.
What should I do if the washbasin smells?
You may use a basin for three meals a day, such as washing vegetables and tableware. However, when using the basin, we don't pay attention to maintenance, which leads to the odor of the basin. What should you do? Mom. Com answers for everyone.
Case 1: The sewer is blocked and smells bad.
The sewer is blocked by food, which makes it moldy and smelly. In order to remove the odor, it is necessary to dredge the sewer and wash it with baking soda hot water.
Situation 2: Too much oil has accumulated in the basin.
Washballs are often used to clean tableware, which has a lot of oil on it. Once the oil gets on the basin, it will affect the basin and cause the basin to stink if it is not removed in time. Therefore, wash the washbasin frequently to remove oil stains. When cleaning, you can use detergent, soapy water or toothpaste.
Situation 3: The basin is aged and rusted.
If the basin rusts for a long time, it will smell of rust. If you want to remove the odor, you can wipe off the decoration with steel balls and then rinse it with lemonade.