Troubleshooting of car wash machine?

Yunnan Jinsheng Car Wash Machine 1 Troubleshooting. The foam sprayed on the car washer is uneven, and it is likely that the foam system is out of order. Important inspection: the air pressure of the car washer is too small or too large, so you can try to adjust the air pressure regulating device. 2. The proportion of car wash liquid may be abnormal, and the proportion of car wash liquid can be adjusted. 3. If the foam pipe leaks or leaks, please check whether the pipe is firm and loose.

4. Stop the rotation of the nozzle of the car washer, check whether the cleaning nozzle is blocked and replace the damaged rotor; The angle of the nozzle can be adjusted appropriately. 5. The water pump has abnormal sound, which may inhale air. Check whether there is water in the water tank immediately, and clean the filter screen to prevent clogging. 6. If the high-pressure water pressure of the water pump is too low, adjust the pressure of the valve and the tightness of the belt, and check whether the valve needs to be replaced. 7. If the running wheel of the car washer slips, check whether it is stuck, whether the bearing is in good condition, and whether the chain is too tight or too loose will cause the car washer to shake during operation.

Yunnan Jinshengxuan 7 Contactless computer car washer Chinese Exhibition. The system uses photoelectric positioning technology to determine the position and distance of the car, and controls the butterfly arm to clean the car body up and down and left and right. The arm can rotate 360 degrees, and the car washing speed can reach 180 seconds. The use of ground rail drive greatly improves the safety factor during car washing.