How to install sea polar space beans

The installation method of sea column space beam is as follows:

1. First, install the fishing reel on the fishing reel seat of the sea pole, turn on the fishing reel inspection switch, and the fishing line passes through the fishing reel outlet frame, and then through each guide hole of the sea pole.

2. Insert 1-2 space beans from the threaded end.

3. Pass through the special drift seat of the sea pole from the threaded end.

4. Insert 1-2 space beans from the threaded end.

5, from the line through the appropriate size of the lead pendant and hook group.

6. Insert the float into the float seat to adjust the float water layer and start fishing.

Space beans are about 0.5 cm long and 0. 15 cm thick. It is made of rubber with a small hole in the middle. Its function is to wear on both sides of the floating ball and the lead seat of the fishing line to prevent the floating ball and the lead seat from sliding on the fishing line. Fishing gear shops sell and assemble space beans, which are fixed on a thin folded wire. When in use, the space bean and the thin metal wire are taken out of the plastic ring and used for assembling the space bean.

Space bean is a rubber bean used by Taiwan Province fishing to fix the floating seat and the lead seat, and can also be used to strengthen the connection between the main line and the soft braid at the tip of the pole. The inside is a hollow through fishing line, which comes from Taiwan Province Province and is an important part of Taiwan Province Fishing Group. Fix the lead seat, with a bean above the lead seat and a bean below to fix the lead seat, so as not to run too far.

Buoy also needs positioning, and two beans are needed to help us remember the water depth. The method is that there are two beans above and below the floating seat, two beans next to the floating seat are responsible for positioning, and the other two beans are responsible for helping us remember the water depth.