What is a wall putty spraying machine? What are its advantages and how to use it?

Putty spraying machine is a small machine for mixing, pumping and spraying high-quality putty powder. It is a machine for spraying putty on a spraying machine. What is a wall putty spraying machine? Mainly crushing several kinds of decorative putty produced at home and abroad, and mixing with 100 mesh coating. The spray gun can achieve atomization effect. The spraying area can reach1500m2/day, which is suitable for the protection of houses, paints and foundation mud.

Advantages of spraying machine products

What is a wall putty spraying machine? First of all, we can stir the putty with a blender before putting it in. This putty is even and has moderate viscosity, which is much better than manual mixing.

Secondly, it sprays quickly. If you use a putty sprayer, it only takes a few minutes to spray the wall. If construction work is carried out, the progress will be much slower.

Spread evenly. If you use a putty sprayer, because some pressure and nozzles are used during spraying, the thickness of spraying is better, and there will be no unevenness, which is better than manual spraying.

In order to save materials, if spraying putty is used, the spraying speed and thickness can be controlled manually, saving materials and operation.

Fold by editing the operating procedures in this paragraph.

1. Turn on the power, press the button, and the work will begin. If the address is reversed, please press the stop button to stop. Adjust the power supply, reverse the start and change the direction. If the direction is opposite, it will not be downloaded.

2. Inject a small amount of water into the inlet of the water supply hose, pump the water to wet the water supply hose, and then gradually discharge the water from the storage place of the water outlet pipe. The drain pipe must be clean, and there can be no residual water in the pipe.

3. Side by side conduit and mortar pipe. This row is connected with pipes and guns.

4. Put the mixed materials into the hopper evenly (it can be used in conjunction with the soot blower).

5. Press the start button to start spraying concrete. In work, the spray quality can be optimized by adjusting the air volume.

6. The speed is adjustable, and its output flow is 0 ~ 8 liters/minute. When working, as long as the flow rate is adjusted to the appropriate output speed, the construction requirements can be met.

7. The mixture must be continuously added into the hopper to ensure the continuity of spraying work. When the spraying work needs to be suspended, it is more convenient to press the stop button. The following methods can be used for remote control. Turning the center of the electrical box to the left is a manual control switch.

8. Before the spraying work is completed, after spraying the remaining materials into the hopper, turn off the air pump and stop after the spraying work is completed.

9. Remove the spray gun, disassemble the parts and clean them one by one.

10. Fill the hopper with water, then press the button to clean the pump. When there is no clear water in the nozzle, press the button to stop, remove the delivery hose and roll it up.

The above is to ask what is the introduction of wall putty spraying machine, I hope it will help you.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~