China Naming Network - Feng Shui knowledge< - The best way to remove carbon deposits

The best way to remove carbon deposits

The best way to remove carbon deposits is: 1. Method 1, high-grade gasoline flushing: Because the octane number of high-grade gasoline is relatively higher than that of low-grade gasoline, the combustion is completely clean, and the possibility of carbon deposits is relatively low. Residual carbon deposits can be effectively cleaned by high-grade gasoline. For example, if your car is full of No.92 gasoline, then you will feel it. ...

The best way to remove carbon deposits

The b way to remove carbon deposits is:

1, method 1, high-grade gasoline flushing: Because the octane number of high-grade gasoline is higher than that of low-grade gasoline, the combustion is complete and clean, and the possibility of carbon deposition is relatively low. Residual carbon deposits can be effectively cleaned by high-grade gasoline. For example, if your car is filled with 92 # gasoline, you can add one box to two boxes of 95 # gasoline if you feel carbon deposit.

2. Method 2: High-speed running: Because high-speed running can prevent carbon deposition by using the scouring effect of airflow on the intake. In addition, improving the shift speed is similar to running at high speed. Changing the shift speed from 2000 to 2500 can not only effectively prevent carbon deposition and improve the power of the car, but also avoid the explosion caused by too low shift speed and protect the engine.

3. Method 3: Use fuel cleaning additive: When the engine is working, the cleaning agent is sucked into the oil supply pipeline by the fuel pump together with the fuel. With the flow of fuel, not only can the glue in the fuel tank, the filter screen of the gasoline pump and the glue and carbon deposit on the fuel nozzle be cleaned, but also the carbon deposit on the valve and engine cylinder can be automatically cleaned when the engine works normally, so that the engine can be rejuvenated and rejuvenated. How much is it to clear the throttle? Hu tu yang che

The cost and steps of cleaning automobile valves;

1, tool selection: the most important tool for cleaning the accelerator is "carburetor cleaner", which can be bought in auto parts city and also in auto city; You'd better buy more bottles every trip. If it is not cost-effective to buy only one bottle, the fuel cost of driving back and forth by yourself may be more expensive than a bottle of detergent, and then you can get a discount if you buy more. Secondly, you should prepare a set of hexagon screwdriver and straight screwdriver (that is, the commonly used I-shaped mouth), as well as a dry rag and a small pile of paper towels. The biggest cost of choosing tools is cleaning agent. Generally, a bottle of detergent can be washed two or three times, and it is considered more expensive if it is washed carefully. If you save, you can wash a bottle four times;

2. Specific process: First, unplug the car key, open the hood and find the throttle of the engine. Remove the air filter and intake pipe with a screwdriver, and unplug the electric socket on the throttle; Then unscrew the three hexagon screws on the throttle with a hexagon screwdriver (pay attention to this step, and be careful that the screws are "lost"); Guangdong automobile service said that after removing the screws, you can take out the throttle and then block the air inlet of the engine with a dry rag to prevent dirt from entering the engine. At this time, you can wipe the throttle with a paper towel and spray the detergent, and the throttle will become clean and beautiful. After that, you don't have to wipe it with paper towels, so the residual detergent can be left on it. The rest of the process is simple, and the disassembly sequence is reversed and reset one by one; Finally, turn the ignition block key (do not start it) and turn it off after 5 seconds. This is an "initialization" process;

3. Clean up the ledger: Just like cleaning the throttle, it takes about 150 yuan to do it once in a 4S shop; If you do it yourself, the account book is as follows: a bottle of detergent 8 yuan; A hex screwdriver 15 yuan; Flat screwdriver 10 yuan; A rag and a tissue add up to a 5 yuan. Next, screwdrivers and rags are standing tools that can be used repeatedly. Cleaning the accelerator once requires less than half a bottle of detergent and a small pile of paper towels, which is not more than 10 yuan. Secondly, the time cost; If you go to a 4S shop for cleaning, it takes time as well as the time to go back and forth to the 4S shop. If you do it yourself and operate skillfully, it only takes about half an hour at a time, and you can do it in your own community;

4. The throttle position of each brand model is different, but it can be operated after finding the throttle. If the owner is unfamiliar with the car, it is recommended that the owner drive to 4s to clean it himself. Avoid deterioration. The best way to remove carbon deposits @20 19