Ask Mr. Feng Shui near Qiandeng in Kunshan to see what should be paid attention to in house decoration?

The winter weather in the north is dry, and the amount of water accumulated in wood is very low. If you choose cheap and restrained wood to decorate your house, there may be problems of cracking and deformation. If fire is not prevented, it may cause a fire. Here is a reminder: you must choose hard and heavy wood. However, water and lighters are used for waterproof and fire protection tests. Ensure the quality and safety of floors and walls.

In addition to the pressure expansion test, the floor-wall connection should also be carried out.

When the wood is connected, leave a little gap at the wood joint. If the seal is too tight, the indoor temperature will rise in hot days and the floor and walls will be airtight. Will slowly deform. The problem of burning. Here, it is good to do a pressure thermal expansion test on the floor wall during decoration, which has ensured that there will be no deformation during use.

The temperature of latex paint should not be lower than 10℃

Latex paint is an essential paint for walls, but the final quality effect of latex paint should be ensured. The only important issue is the control of temperature. The insulation temperature of latex paint should be controlled at 10℃-20℃. Each kind of latex paint has detailed instructions. After the house is painted with latex paint. It is necessary to open a window to discharge formaldehyde from latex paint. Make sure the house has no smell.

Light it with a lighter before tiling.

If the floor is ceramic tile, two tests should be carried out first: 1 Burn the ceramic tile under the surface of the ceramic tile with a lighter to see if the surface of the ceramic tile will be black. 2. Soak in water for about 1 hour to increase the saturation of tiles. In this way, the problems of weak bonding and falling off in use will not occur when tiling.