How does the thermostat adjust the temperature?

Method for adjusting temperature by temperature regulator: 1. When the ambient temperature is high in summer, the weak gear 1-2 should be used. This is because the ambient temperature is high in summer, so the temperature in the refrigerator drops slowly, and the loss of cold energy through the insulation layer and door seal will be accelerated, so the start-up time will be longer, but the shutdown time will be shorter, which will lead to the long-term operation of the compressor, which will aggravate the wear of the piston and cylinder, the insulation performance of the motor coil enameled wire will also be reduced due to high temperature, and the power consumption will also rise sharply. 2. In winter, the general gear should be above gear 3. This is because the cold storage environment in winter is relatively low and it is easy to reach the set temperature. If the set temperature is too high, it is easy to start the refrigerator for a short time, which will lead to the failure of refrigeration effect. Generally speaking, the ambient temperature below 16 degrees can be adjusted to the third gear, and below 10 degrees can be adjusted to the fourth or fifth gear.