Ignore the installation position of the lamp.

Ignore the installation position of the lamp. In order to integrate comfort and modernity into family decoration, attention must be paid to details. The installation position of lamps should be reserved to match the circuit layout and switch position, so that all kinds of lamps can play a functional and decorative role. The installation position of lamps is neglected, and I hope to give you a warning.

The installation position of lamps is ignored 1 Failure that the installation position of these lamps is ignored:

1, after washing and cutting vegetables in the kitchen, the light is blocked by the body, and it is often difficult to see clearly;

2. I read a book on the sofa and found a reading lamp missing;

3. When making up, the light is yellow and dark, and I feel that the makeup is too strong when I go out;

The installation position of these lamps is easily overlooked:

First, add a lamp under the cupboard to wash dishes and cut vegetables more efficiently.

1, spotlights or downlights are embedded in the bottom of the cabinet.

When installing, it is necessary to calculate the distance between lights to avoid light interleaving. If you don't want wiring, you can also use induction spotlights driven by dry batteries. Can be fixed directly under the cabinet.

2. Install a light strip or tube under the cabinet.

Light strip: the position is selected at the bottom of the cabinet 200~250mm away from the wall. When you meet the corner, you can use a soft light belt.

Lights: It is recommended to reserve the position of lines and switches at the initial stage of installation.

3. In the case that the vegetable washing area and the vegetable preparation area are not under the cabinet, it is recommended to install spotlights or chandeliers on the top surface.

Second, put on the reflector headlights, and the makeup will be more beautiful.

1, installation tips for rearview mirror headlights:

It is better to install on both sides of the mirror than on the top. Because the light source is on both sides, it can ensure that the light is directly directed to the face; If you are at the top, you need to adjust the light angle to minimize the shadow on your face.

2, light source selection:

It is suggested that the brightness should be higher and the color should not be too yellow, which will produce color difference and affect the beauty effect.

Thirdly, since there is a light in the wardrobe, it is really convenient to find clothes.

The light in the closet is dim, and sometimes it is very troublesome to find clothes. In fact, it is very convenient to install a induction lamp, which lights up when you open the door and goes out when you close it.

There are three kinds of commonly used induction lamp:

1, automatically open according to the environment.

Always open, consistent with the wires reserved by traditional sockets. The price is 35~50 yuan.

2, according to the infrared temperature to decide whether to open.

After people walk, they can be extended and closed, and controlled in series with ordinary switches. Price 170~200 yuan;

3. Use dry batteries without wires.

Judging by infrared induction, but not sensitive enough, it is only used at close range, and the price is 70~ 150 yuan.

Besides induction lamp, you can also choose the combination of light strip and remote controller, which has the advantage of being able to control manually and adjust the brightness at will, but the cost is higher.

Fourth, wall lamps are installed around the sofa to fill the light and save space.

Wall lamp installation skills:

1, open wire wall lamp

Install the wall lamp directly on the wall you think is reasonable and do ordinary wall treatment;

2, dark wall lamp

The threaded end should be reserved in advance during installation.

3. The wall lamp installation height around the sofa should be slightly higher than the apparent horizontal line.

When purchasing: it is recommended to choose a retractable wall lamp, which can flexibly change the height and angle according to the actual use.

Induction lamp, the entrance is no longer dark.

I want to have bright lights as soon as I get home, but it takes a long time to turn on the main light of the entrance. Add induction lamp and solve the problem easily.

Where can induction lamp be installed? Suitable for the door, under the hanging cabinet and inside the shoe cabinet. Especially in the storage area, after installing induction lamp, you are no longer afraid to look for things in the dark.

Ignore lamp installation position 2

A, ceiling lamp installation matters needing attention

Most ceiling lamps are flat and stick to the roof, just like sticking to the ceiling, hence the name. The ceiling lamp has small space and even and soft lighting, which is especially suitable for use in halls, corridors, kitchens, bathrooms and bedrooms.

Installation method of ceiling lamp

1, ceiling lamp fixed

First, put the chassis on the roof, draw the punching position according to the fixed position, and punch a hole in the position to be installed with an impact drill. Use a hammer to fill the holes with fixing parts such as expansion screws. It should be noted that the bearing capacity of the fixing parts should match the weight of the ceiling lamp to ensure that the ceiling lamp is firmly fixed.

2, ceiling lamp wiring

Take out the wire on the roof from the hole in the chassis, and fix the chassis in the above position with screws. After fixing, connect the conductor with the conductor of the chassis, wrap the exposed part of the conductor connection with insulating tape, and install lamps and lampshades.

Matters needing attention in installing ceiling lamp

1, pay attention to safe drilling.

For the safety of family members, unless there are special requirements, the hole in the wall of the fixed lamps is generally 6 mm When installing and using the impact drill, you must install a matching drill. Pay attention to the drilling depth when drilling to ensure that the expansion screw can completely enter.

2. Pay attention to the safety of the power cord.

The wires connected with the power socket of the ceiling lamp should have good electrical contact and be wrapped with vinyl cloth respectively, and keep a certain distance. If possible, try not to put the wire ends under the same metal to avoid the danger of short circuit.

Second, the chandelier installation matters needing attention

The chandelier is a decorative lighting lamp used on the indoor ceiling, and its noble shape can show the grandeur of the house. The use of chandeliers requires the house to have enough floors, and because of the weight of chandeliers, it is required to be fixed more firmly.

Installation method of chandelier

1, the chandelier is fixed

The fixing of the chandelier is similar to that of the ceiling lamp. First, draw the drilling point, punch the hole with an impact drill, and then drive the expansion screw into the hole. It is worth noting that because the load of the chandelier is generally greater than the ceiling lamp, it is necessary to fix the ceiling with a metal hanging plate or hook first, and then connect the pedestal of the chandelier, which can make the installation of the chandelier more firm.

2, chandelier connection

Tighten the screws and the base will be installed. Connect the power cord, and the exposed part of the copper wire is wrapped with insulating tape. Then connect the boom with the base and adjust the appropriate height. Install the lampshade and bulb of the chandelier.

Precautions for installation of chandelier

1, pay attention that the chandelier cannot be installed too low.

The use of chandeliers requires the house to be high enough. No matter whether the chandelier is installed in the living room or dining room, it should not be hung too low, so as not to hinder people's normal sight or make people feel dazzling. Generally, the height of the sling can be adjusted. If the house is low, it is brighter and more generous to use the ceiling lamp.

2, pay attention to the chassis fixed firmly and safely.

The basic requirement for the installation of lamps and lanterns is that they must be firm. When installing all kinds of lamps and lanterns, they should be installed according to the requirements of the installation instructions of lamps and lanterns. When the weight of lamps and lanterns is greater than 3kg, embedded hooks should be used or expansion bolts should be used to directly fix supports and hangers from the roof for installation.

3, check whether the derrick connection is firm.

Generally, the suspenders of chandeliers have a certain length of thread, which can be used to adjust the height. After installation, besides carefully checking whether the chassis is firmly fixed, we should also pay attention to the reliability of the connection of the light box suspended under the hanging boom.

Third, the spotlight installation matters needing attention

Spotlight is a kind of lighting lamp installed in a narrow space. Because it depends on reflection, it can produce strong light with little electric energy. Can be used to highlight a certain place in the room, but also to increase the three-dimensional sense and create a special atmosphere.

Installation method of spotlight

1. Plan to keep the spotlight position.

The installation mode of spotlights is mainly embedded installation. Generally, lines are reserved according to the decoration scheme, so that decoration workers can make holes in the ceiling and appropriately reserve empty slots for spotlights.

2. Spotlight connection

Install the base in the empty slot of the spotlight, pull out the wire and install the fixing screw. Connect the connector, and don't forget the insulation treatment, according to the lighting part.

Precautions for installing spotlights

1, note that the spotlight line needs to be equipped with a transformer.

Although spotlights are energy-saving, high brightness and strong decorative effect, they also have some disadvantages that cannot be ignored, that is, the voltage is unstable and easy to explode. Therefore, when installing spotlights, you must install transformers, which can effectively prevent explosions.

2. Pay attention to the correct installation of spotlights.

The choice of lamps and lights must be moderate, especially spotlights. If we blindly pursue the number of spotlights, it will cause light pollution and it is difficult to achieve the ideal decorative effect. At the same time, too many spotlights are placed, which is more likely to cause fire hazards.