How to select and adjust cylinder pressure

There are many types of cylinders, which are selected according to the following steps:

1. Choose the cylinder diameter according to the strength, for example, choose a cylinder with a diameter of 50 or 63 according to your requirements.

2, according to the installation environment and use, determine the type of cylinder, such as multi-station installation for easy installation; In order to be light, a lightweight aluminum cylinder is needed; If the cylinder is required to be shorter, use a thin cylinder; If the space is narrow, use a rodless cylinder, etc.

3. Determine the installation method, foot seat, earrings or flange to install the cylinder.

4. Accessories requirements, such as whether a magnetic switch is needed, whether the rod does not rotate, whether it is resistant to high temperature and corrosion, etc.

Pressure adjustment is very simple. There is a filter pressure regulating valve on the machine. You can adjust the pressure by turning the knob directly. If the cylinder simply moves without delay, it will be fine. After adjustment, press the knob and get stuck to prevent others from misoperation or loosening the rotation.

The glass bottle on the cylinder? I think what you see is the booster cylinder on the molding machine, which is a special kind of cylinder. Its propulsion is divided into two parts. At the beginning, progress was rapid. Near the finish line, the compressed air pushes the oil, and the oil pushes the piston forward slowly, with greater strength. The glass bottle you see is an oil tank.