What should I pay attention to in water and electricity acceptance?

In the process of decoration, the quality of concealed works is very important. And after the completion of concealed works, strict acceptance work should be carried out. Among them, hydropower acceptance is a very important project. Especially for the owners of renovated old houses, hydropower transformation is very important. If the hydropower transformation is not done well, it will have a great impact on your subsequent use, and the concealed works have quality problems, so maintenance is very difficult. But what should be done to avoid the problems after check-in? 1. The light with bad conditions such as corrosion must be dealt with quickly?

corroded or broken water pipes must be treated in time, and it will be very troublesome to maintain them when problems occur. When accepting hydropower projects, the quality of water pipes must be strictly checked, and the inner and outer walls of water pipes should be smooth and flat, and there should be no bubbles, cracks, depressions, peeling and cold spots! Excellent quality, such as: Poly antibacterial HI-PPR water pipe A, the inner layer of the water pipe contains silver ion antibacterial masterbatch, which inhibits the activity of bacterial cell enzymes and the reproduction and regeneration of bacteria. B, the middle layer is grayish yellow PPR, which has strong shading property and avoids water oxidation and bacteria generation. C, the outer green PPR layer is added with ultraviolet absorber, which greatly enhances the aging resistance and impact resistance of the product.

2. The construction should be standardized, and the distance between hot and cold water pipes should be paid attention to?

when living at home, hot and cold water pipes are most prone to problems, such as the interface between water pipes and water heaters, which can't be docked. The main reason for this situation is that the distance between hot and cold water pipes is not up to standard. It should be noted that the left side is hot and the right side is cold, and the distance between the centers of cold and hot water embedded in the mixing faucet is 15cm. The error range is between .1 cm. ?

3. Pay attention to the location of water pipes and other light?

water and electricity pipelines, gas pipelines, etc. should not be crossed when they are laid out. If gas pipelines and circuits are pressed under water pipes, water leakage or gas leakage will easily occur, which will lead to fire hazards! The layout of hydropower pipelines is horizontal, flat and vertical, and it is not advisable to cross wiring and pull wires nearby! ?

4. The pipeline inside the wall must be made of casing, and PPR is the best material. The planning and layout of power lines need to meet the maximum output power! ?

5. Pay attention to the installation of power sockets, and the number should be sufficient! If the zero line and live wire of the power socket are wrongly connected, it will be short-circuited. Be careful when installing the socket, and conduct a power-on test when accepting the water and electricity to confirm whether the power socket can be used normally. The number of power outlets must be reserved enough to ensure future use. In addition, we must pay attention to the following problems in the acceptance of hydropower projects: the kitchen and bathroom must be waterproof, and waterproof tests should be done after completion. When laying tiles after the waterproof project is completed, be sure not to damage the waterproof layer when laying tiles. After the completion of ceramic tile laying, water closing test should be done. Look for leaks. If it is the renovation of old houses, the owners of the renovation of old houses should pay special attention. The renovation of hydropower projects is very important, and the layout of hydropower pipelines is unreasonable. We should be cautious in dealing with this problem. ?

(It is forbidden to reprint without permission)

The content is provided by Sunshine Vika, a good user. For more questions, please communicate directly with the owner through the good APP ~