Four samples of graduation thesis mid-term report
Graduation thesis mid-term report sample 1
1. Basis for topic selection (the purpose and significance of the proposed research project)
Purpose of the research project:
E-government refers to the use of modern information technology by government agencies in their management and service functions to achieve the reorganization and optimization of government organizational structures and work processes, transcending the constraints of time, space and departmental separation. , and build a streamlined, efficient, clean and fair government operation model. As a key application project of e-government public service, online administrative approval service is to achieve the requirements of the report of the 16th National Congress of the Communist Party of China to "further transform government functions, improve management methods, and form an administrative system with standardized behavior, coordinated operation, fairness, transparency, integrity and efficiency". management system”.
An important task of the science and technology department is to guide the direction of scientific and technological innovation through various science and technology plans and projects, provide science and technology funds to support outstanding projects, and promote scientific and technological innovation in relevant enterprises and institutions. As far as science and technology project management is concerned, various localities have been actively exploring science and technology plan project management methods in both theory and practice, and have achieved great results in practice. At present, most of this type of software only partially implements the online application function, and most systems have not yet implemented the online project management and expert review functions, which greatly reduces the efficiency of technology project application and management. Therefore, it is very necessary to develop an online declaration system based on Internet conditions.
Significance of the research project:
The application of this system will make necessary adjustments to traditional government affairs processes and organizational structures. Through the innovation of management concepts, management functions will be transformed and new management will be formed. model and management process, so that science and technology management can truly adapt to the needs of the current science and technology project authorities, making science and technology project management work more scientific, standardized, and highly operable. At the same time, an expert review mechanism has been introduced to enable experts and management agencies to The role of evaluation and review has become increasingly prominent, which has effectively promoted the scientific process of science and technology plan project management, achieving the purpose of strengthening macro management, improving management efficiency, and promoting scientific and technological progress.
2. Current research status at home and abroad (with main references)
The rapid development of information technology in the 1990s, especially the popularization and application of Internet technology, has made the development of e-government It has developed into one of the most important fields of contemporary informatization. According to a survey conducted by UNESCO in 2000 among 62 countries (39 developing countries and 23 developed countries), 89% of countries have begun to promote the development of e-government to varying degrees and classified it as Matters of national importance. According to data held by the United Nations Department of Economic and Social Affairs, in 1996, less than 50 government departments around the world had established their own websites; by 2002, 50,000 government websites had been launched around the world. In fact, e-government has rapidly entered the political agenda of all industrialized countries.
The internationally renowned Accenture consulting company conducted a survey on the development of e-government in 23 countries and regions in 2001 and 2002, and classified these 23 countries and regions according to the development of e-government. The maturity level is divided into four categories in order:
Innovative and leading countries: Canada, Singapore, the United States;
Countries and regions with better development: Australia, Denmark, the United Kingdom, Finland, Hong Kong, Germany, Ireland, the Netherlands, France, Norway;
Countries making steady progress: New Zealand, Spain, Belgium, Japan;
Countries laying the foundation: Portugal, Brazil, Malaysia, Italy, South Africa, Mexico.
Of course, this study does not include some developing countries such as China, India, Egypt, etc., nor does it include Russia and some countries in economic transition in Eastern Europe.
One such portal that the U.S. federal government has established is FirstGov. It is the first simple, easy-to-use, single point of entry into the federal government that the large and complex U.S. federal government has provided residents. website. Through this website, residents can access approximately 20,000 websites of various federal government departments and search approximately 30 million web pages.
The website provides classified government information on 16 topics according to administration, legislation, and justice, and can complete some simple and low-risk business processing. This website currently has approximately 12,000 visitors per day, and more than 100,000 pages are viewed per day. The Canadian government's portal website is also a relatively successful example. It divides users into three categories: residents, businesses, and non-Canadian citizens. All types of people can find the corresponding services provided by the Canadian government according to their own needs.
Looking at the development status of e-government in various countries, the current construction of e-government is mainly focused on government office automation information and some online services. For example, applications such as online education, online health consultation, electronic application, electronic tax filing, electronic procurement, electronic payment, electronic database and online publishing, public information station, etc. In recent years, countries around the world have accelerated the construction of "e-government" by adjusting policies and regulations and promoting the electronicization of government services. Taking "electronic service delivery" (ESD) as the core of e-government, many countries have formulated their own ESD goals, and some countries (such as the United Kingdom, etc.) have regular monitoring and evaluation of the electronic service process. In 2001, 88% of the 190 member states of the United Nations had established government-related websites and implemented some form of e-government services. However, more than 25% of countries are still in the stage of providing static and insufficient information services, that is, only the release of government public information, introduction of government agencies, etc., lacking a customer-centered concept, mainly in Asia, some countries in the Caribbean and Africa. In some developed industrial countries such as Europe, North America and South America, many have implemented interactive and even transactional services, and many countries have established one-stop portals. Transaction processing is one of the core application goals of e-government. At this stage, users can complete a complete process of transactions with the government. Most member countries of the Organization for Economic Cooperation and Development (OECD) have established a single portal, and the United Kingdom and Singapore have also adopted user ID entry systems. In these countries, a "customer-centric" service concept is advocated. All content is updated in time according to user needs. Australia, the UK, Ireland, Brazil and the US all provide users with a simple navigation portal for transaction processing.
3. Research plan (main research content, objectives, research methods)
Research content:
This system is a network-based system for government It is an e-government application system that handles project approval matters for external public service collaboration and realizes the effective execution, supervision and management of science and technology project application and approval.
According to actual business operational needs, the science and technology project application system can be divided into three major platforms:
(1) Unit application platform
Online public *** service The main users of the platform are public entities that conduct review and approval applications. The online public service platform operates on the Internet to provide the public with line item declaration services. It is a one-stop service portal that enables interactive dialogue between the public and the government. The online public service platform not only achieves the goals of open government affairs and transparent services in the administrative approval reform, but also truly realizes a one-stop service function for the entire approval process from service consultation, application submission, to project tracking and communication and defense. .
(2) Expert review platform
(3) Administrator management platform
The administrator management platform is where administrators manage application projects and review projects. He can add and delete units and experts, assign experts to projects declared by units, and realize management business functions such as information sharing, task scheduling, collaboration and interaction, and management monitoring. The management platform includes window services, units, experts, projects, distribution and other corresponding functions.
Research objectives:
By implementing this system, the following goals will be achieved:
(1) Establish a customer-centered online platform to provide social services One-stop service portal for application review and approval.
(2) Realize the collaborative work of application, review and approval to greatly improve efficiency.
(3) Dynamically supervise the progress and results of business processing to achieve supervision and supervision of business processing.
(4) Realize quantitative management of declaration management, comprehensive monitoring, optimize government affairs processes, and improve government operation efficiency.
(5) Provide reliable role authority management and information security assurance system to ensure safe, efficient and reliable operation of approval business in the application system.
Research method:
This system adopts the B/S three-tier architecture model. The bottom layer is the data layer, that is, the database, which is used to store the data used in the system; data access The layer receives requests from the business layer, uses stored procedures or other methods to obtain data from the data layer and sends it back to the business layer to write data to the database; the business layer acts as a bridge. This layer responds to requests from the user layer and verifies the legality of user data. , sends the request to the data access layer, and transmits the data returned by the data access layer to the user layer, thus separating the business logic from the user interface. The client uses a browser to access, and the server uses JDK+Tomcat access form to improve the security of the system; during system development, SQL Server is used as the system database, Tomcat is used as the Web server, and MyEclipse8.5 is used as a static web page development Tools to improve the overall aesthetics of the system.
Main references:
Graduation thesis mid-term report sample 2
1. The meaning and function of the proposal report
Proposal report, After the direction of the topic is determined, the person in charge of the topic writes a topic selection plan based on investigation and research and submits it to superiors for approval. It mainly explains that this topic should be researched, that you have the conditions to conduct the research, and how to prepare to conduct the research. It can also be said to be the demonstration and design of the topic. The proposal report is an important part of improving the quality and level of topic selection.
The research plan is the work plan for the entire subject research that the researchers formulate after the subject is determined and before the formal launch of the research. It preliminarily stipulates the specific content and steps of all aspects of the subject research. The research plan plays a key role in the smooth development of the entire research work, especially for those of us with less scientific research experience. A good plan can prevent us from not knowing where to start, or not knowing what to do next after a period of time. situation to ensure that the entire research work is carried out in an orderly manner. It can be said that the level of the research plan is an important reflection of the quality and level of a project.
2. Basic work that should be done to write a good research plan
On the one hand, to write a good research plan, you must understand their basic structure and writing method, but "If you want to learn poetry, Kung Fu "Outside of poetry", writing a proposal report and research plan is important to do a lot of basic work. First of all, we need to understand the basic situation of other people’s research in this field. The most fundamental characteristic of research work is to be creative. If we are familiar with other people’s research in this area, we will not be in a situation where others have already done a lot of research and are very mature. Next, we will repeat the path that others have taken, but will stand on the basis of other people's research and engage in research on higher-level and more valuable things; secondly, we must master the basic theoretical knowledge related to our topic and have a solid theoretical foundation. Research work can only have a solid foundation. Otherwise, without a theoretical foundation, it will be difficult for you to conduct in-depth research and create real creations. Therefore, when we conduct scientific research, we must collect data from various aspects and strengthen theoretical study. In this way, we can be more confident when writing reports and plans, and the reports and plans we develop can be more scientific and complete.
3. Structure and writing of the project research plan
The project research plan mainly includes the following aspects:
(1) Project name
< p> The topic name is the name of the topic. This may seem like a small problem, but in fact, when many people write the title of a topic, they often write it inaccurately and inappropriately, thus affecting the image and quality of the entire topic. This is what people usually say, "I can only give birth to children, but I can't name them." So, how to name the topic?First, the name must be accurate and standardized.
Accurately refers to the name of the topic. It should explain clearly what the problem of the topic is and what the object of the research is. The name of the topic must be consistent with the content of the research. It cannot be too big or too small. Accurately summarize the objects and problems of your research.
Standardization means that the words and sentence patterns used must be standardized and scientific. Specious words cannot be used, and slogan-type and conclusion-type sentence patterns should not be used. Because we are conducting scientific research, we must use scientific and standardized language to express our thoughts and opinions. The topic is the problem we want to solve. This problem is being discussed and research is just beginning. There should be no conclusive tone.
Graduation thesis mid-term report sample 3
1. Design (thesis) progress
1. After preliminary study and demand analysis, I have roughly grasped Understand the writing process of Java programs, as well as the use of frameworks in Java, coupled with the understanding of databases, and become familiar with the connection between Java programs and databases.
2. Conducted a comprehensive analysis of the system, and conducted requirements analysis and functional module design. Conducted systematic analysis and design of the relationship between the system and the database. The design of the test question table in the database has been optimized.
3. Implemented the database design, with a maximum of 8 database tables. ExamStu exam question sheet for candidates. Choose body form, JCloze fill-in-the-blank question form, estimate definite question form, Jquiz short-answer question form, choose-an multiple-choice answer form, Jcloze-an fill-in-the-blank answer form, estimate-an definite answer form, etc.
4. It has been implemented to extract different types of test questions according to difficulty settings and combine them
(1) The administrator logs in to enter the test questions
(2) The administrator manages the test questions in the database, such as deleting and modifying them
(3) Students can get an automatically assigned test paper from the system after logging in
(4) Teachers After logging in, you can see the test papers of the candidates and make comments
(5) The system can automatically score the test papers submitted by the candidates, such as multiple-choice questions and confirmed questions
5. Complete the translation of 3,000-5,000 words of foreign language materials related to the major.
2. Existing problems and solutions
1. The existing problems are: the permissions of administrators, students and teachers
The solutions are: according to The entered user name and password are retrieved from the database and saved as a session based on the user's permissions. When a new page is opened, the session is determined.
2. The existing problem is: the test questions are randomly assigned.
The solution is: (1) When designing the database, set a keyword in each test question table to distinguish the selected ones. Exam questions.
3. The existing problem is: for the automatic comparison of confirmation, fill-in-the-blank and multiple-choice questions in the test paper of the candidates
The solution is: adding an answer table and setting up Keywords of a table associated with it
4. The problem is: when designing the database, after the candidates finish the exam, the test papers answered by the candidates cannot be correctly associated with the test questions
The solution is to set primary and foreign keys to connect tables.
5. The existing problem is: system security problem
The solution is: (1) Use the database's own security management measures and Windows security management measures
(2) Add filters to verify identities when accessing system resources to achieve reliability.
3. Later work arrangements
1. Continue to complete the questions about the candidates being randomly assigned test questions during the exam, and about the fluctuation of the difficulty of the questions during the exam
2. The issue of centralized test question allocation
3. The issue of permissions for different test personnel. Login with different identities can only see the corresponding page, which constitutes the test report document.
4. Improve system security. And conduct tests to form test report documents.
5. System acceptance test and constitute test report document.
6. After completing the system, under the guidance of the instructor, write an article focusing on the development of this system, existing problems
and a summary of the system development experience. A thesis of about 15,000 words, as a report and summary of the completed graduation project
Graduation thesis mid-term report sample 4
Since the graduation thesis topic selection began in November 20XX , as of April 20XX, I have mainly completed the following work:
1. Seriously do the preliminary preparations for the graduation project
1. By retrieving the literature, I read more than I referenced many literatures and wrote a literature review;
2. After reading and comparing literature reviews, I found a suitable testing method, and under the guidance of my tutor, Mr. Nie Xiang, I found the entry point for completing the project. ;
3. Searched relevant literature again, continued discussions with the tutor, and determined the direction of the paper;
4. Prepared a thesis argumentation report, and received preliminary approval from the teachers. The project proposal report was revised again based on the opinions and recommendations, and the final project proposal report was completed and passed the review;
5. Through research and analysis, it is necessary to select an appropriate standing wave ratio measurement method, and Several methods were selected;
6. After many discussions with the teacher, the final test method was determined;
Standing wave measurement line method:
When electromagnetic wave energy is transmitted to the surface of the shielding material, part of the energy is reflected due to impedance mismatch, and the remaining energy continues to transmit to the right through the shielding material sample. Assume that the incident power is Pi, the reflected power is Pr, and the transmission power after passing through the material is Pt. According to the transmission line theory:
P absorption=Pi—Pt—Pr=Pi (1—︱Γ︳2 )—Pt
Wave absorption characteristics: L absorption = Pi—P absorption (dB)
Shielding efficiency: SE = Pi—Pt (dB) The actual test system is shown in the figure below , the test steps are as follows.
(1) Connect the terminal of the standing wave measurement line to a matching load, turn on the signal source power, and adjust the measurement line system;
(2) Remove the matching load, replace the power meter, and measure Signal source output power Pi;
(3) Insert the material sample between the standing wave measurement line and the power meter, and read the power reading at this time from the power meter, which is Pt;
< p> (4) Select an appropriate standing wave ratio measurement method and use the measurement line to measure the standing wave ratio S at this time;(5) Calculate the shielding effectiveness and wave absorption characteristics.
2. Main existing problems
1. The main structural level of electromagnetic performance testing methods and analysis is not very clear;
2. The test steps are not clear enough and The logic is not rigorous enough;
3. Specific ideas and arrangements for the next step of work
1. Revise the rationality of the overall structure of the project
2. Modify the details of the completion design
3. Listen to the instructor’s opinions and adjust the completion method;
4. Enhance the logic and rigor of the test data analysis, and use all the Conduct detailed and in-depth demonstrations of scientific theories and the latest statistical data;
5. Read relevant professional literature extensively and carefully, and standardize academic terminology;
6. Supplementary data collection and strive for citations Draw conclusions using the latest authoritative argumentation methods;
7. Check out relevant examples within the professional scope of this topic, and use the examples to conduct more detailed and in-depth arguments;
8. Carefully and carefully Read the article, correct typos and punctuation marks, polish the text, and add transitional and echoing sentences to enhance the logic of the article.
When everything is ready, just wait for the laboratory to open and the materials to be tested arrive. After completing the test, you can finalize the paper and proceed to the next step as soon as possible.